102mm plate kit feed line? - LS1TECH

Go Back   LS1TECH > LS1-LS2-LS3-LS6-LS7 PERFORMANCE > Nitrous Oxide
Log In 

Nitrous Oxide
Installation | Tuning | Products

102mm plate kit feed line?

Thread Tools Search this Thread
Old 02-25-2012, 10:05 PM   #1
On The Tree
Join Date: Mar 2008
Location: Durant ok
Posts: 100
Default 102mm plate kit feed line?

Have the 102mm plate kit from N20 outlet. Works fine on the 150 shot but is the line they send with the kit -4 big enough for a 250 shot? Do i need to go to a -6 line? Also has the high fuel pressure setup. What fuel pressure is everybody running with a standalone/dedicated?
redriver racing is offline   Reply With Quote
Old 02-28-2012, 11:56 PM   #2
iTrader: ( 25 )
Join Date: Jun 2002
Location: Waco, TX
Posts: 12,141

The 16 ft 4 an main feed will start to hit a wall around the 250 hp mark. So if you want to go over that upgrade to the 6 an and you will be set.

If you have the jets for high pressure set the dedicated at 55psi.

If you want the highest quality, highest flowing products backed by the most knowledgeable staff with full time tech service that answers the phones full time, responds to pms, emails and post on the boards with technical information our products and our company is the choice for you.
"The Bitterness of Poor Quality Lingers Long After The Sweetness Of Cheap Price Is Forgotten".
Nitro Dave's Nitrous Outlet is offline   Reply With Quote

102, 102mm, big, kit, ls1tech, plate, shot

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -5. The time now is 05:05 AM.