Using a 100 NX wet kit and M6 trans in what gear should I spray? - LS1TECH

Log In 


Nitrous Oxide Installation | Tuning | Products

Using a 100 NX wet kit and M6 trans in what gear should I spray?

Reply
 
Thread Tools Search this Thread
Old 03-01-2002, 02:42 PM   #1
Teching In
Thread Starter
 
Join Date: Feb 2002
Posts: 17
Default Using a 100 NX wet kit and M6 trans in what gear should I spray?

I need to know what gear it is safe to spray in with a 100 NX wet kit and a M6 trans...I'VE never sprayed before..trying to be safe?
Thanks

BIG RAM 1 = RED 2001 WS6 M6
>HPP III, K&N, Hotchkis shock tower brace, Mac headers & offroad Y-pipe & 10 bolt girdle cover, O2 simulators, Raven muffler, Ls1 Air Lid, MSD wires, NGK plugs
BIG RAM 1 is offline   Reply With Quote
Old 03-01-2002, 02:54 PM   #2
On The Tree
 
LS1 Kyle's Avatar
 
Join Date: Feb 2002
Location: Round Rock, TX USA
Posts: 148
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

Don't even try first gear on the steet. You can safely spray in second after 3000 RPM. Actually it's safe to spray in first too, but I wouldn't recommend it unless you were on sticky tires and that might not be good for your rear end either.

To be safe, only spray between 3000-6000 RPM and don't spray deep into 5th or any of 6th at all!

Have fun...

[ March 01, 2002: Message edited by: LS1 Kyle ]</p>
LS1 Kyle is offline   Reply With Quote
Old 03-01-2002, 03:28 PM   #3
Teching In
Thread Starter
 
Join Date: Feb 2002
Posts: 17
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

Thank LS1 KYLE
BIG RAM 1 is offline   Reply With Quote
Old 03-01-2002, 04:11 PM   #4
LS1Tech Sponsor
iTrader: (12)
 
Join Date: Nov 2001
Location: Bridgewater,Ma
Posts: 14,863
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

I spray 1st-4th with a window switch set at 3000-5800.Just be carefull in first since you'll light them up and not hit the rev limiter.
Slowhawk is offline   Reply With Quote
Old 03-01-2002, 04:27 PM   #5
9 Second Club
iTrader: (2)
 
ANIL8U's Avatar
 
Join Date: Nov 2001
Location: STL, MO
Posts: 521
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

I would defiantly get a window switch! If you ever miss a gear or hit the rev limiter, you can damage your intake or air box! In addition, if you have an SS you will lose the grill that is in the scoop! (I have hit the rev limiter once and all this **** broke)
ANIL8U is offline   Reply With Quote
Old 03-04-2002, 08:59 PM   #6
11 Second Club
 
Join Date: Nov 2001
Location: Hanover MD
Posts: 1,643
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

i have my window switch set at 3000-6000, and i can spray in 1st gear, but i dont try to launch my car hard at all. i dump it at like 2000 and then it pulls till it hits 3000, then its like a rocket ship. but that is on drag radials, on gsc's, 2nd gear about spun the car around.


12 bolt and clutch on the way!!!!!!!!!!!!!!!
EVIL is offline   Reply With Quote
Old 03-05-2002, 09:46 AM   #7
Launching!
 
Join Date: Nov 2001
Location: Albany N.Y
Posts: 226
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

1st gear BFG's with a 3000rpm Window switch. Hang on!
69Muscle is offline   Reply With Quote
Old 03-09-2002, 12:08 AM   #8
TECH Fanatic
 
Join Date: Nov 2001
Location: Iowa :-/~
Posts: 1,705
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

1st, 2nd, 3rd, 4th gear window switch did 3000 but changed to 3300 up to 5800 on Nitto drags. Have a WOT MSD RPM switch, fuel safty cut off also. With new mods listed below this summer out of the whole. <img src="gr_grin.gif" border="0">
2000 Camaro SS is offline   Reply With Quote
Old 03-10-2002, 08:37 PM   #9
11 Second Club
 
Join Date: Nov 2001
Location: Hanover MD
Posts: 1,643
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

[quote]Originally posted by 69Muscle:
<strong>1st gear BFG's with a 3000rpm Window switch. Hang on!</strong><hr></blockquote>


it wont 60 foot, but it made 120.7 mph friday night on a 100 shot. its not even pulling hard till the 330 foot mark. but man what a rush!!!!
EVIL is offline   Reply With Quote
Old 03-11-2002, 07:31 AM   #10
On The Tree
 
Join Date: Jan 2002
Location: Aloha, Oregon
Posts: 120
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

if you can hook, then in any gear >3k rpm, to include 5th and 6th (especially if you make an assult on top speed run)
nitrousc5 is offline   Reply With Quote
Old 03-11-2002, 02:48 PM   #11
11 Second Club
 
Join Date: Nov 2001
Location: Hanover MD
Posts: 1,643
Default Re: Using a 100 NX wet kit and M6 trans in what gear should I spray?

top speed.....!!!! scarey!
<img src="gr_eek2.gif" border="0">
EVIL is offline   Reply With Quote
Reply


Tags
100nx, 69muscle, gear, ls1, m6, nitrous, rush, system

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 10:18 AM.