Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Stock Cube Nitrous Car Coming Around

Thread Tools
 
Search this Thread
 
Old 06-10-2012, 12:00 AM
  #1  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default Stock Cube Nitrous Car Coming Around

I finally got some passes in tonight. My 60ft is still off the best I could get was a 1.50 but was still able to run a 6.1 @ 117 mph. I guess I will be tweaking on the suspension this week.
Old 06-10-2012, 12:38 PM
  #2  
TECH Resident
iTrader: (3)
 
krissoto's Avatar
 
Join Date: Mar 2009
Location: Bonne Terre, MO
Posts: 863
Likes: 0
Received 0 Likes on 0 Posts
Default

very nice, def moving.
Old 06-10-2012, 01:01 PM
  #3  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok technically it was 116.83 mph, I just looked at the time slip again. I was just being optimistic, lol
Old 06-10-2012, 02:04 PM
  #4  
Launching!
iTrader: (4)
 
Pete91's Avatar
 
Join Date: Feb 2011
Location: New York Queens
Posts: 205
Likes: 0
Received 0 Likes on 0 Posts
Default

Wow what does it trap in the big end?
Old 06-10-2012, 02:36 PM
  #5  
11 Second Club
 
lncboytre_d's Avatar
 
Join Date: Jun 2006
Location: Lancaster, tx
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts
Default

Car info?
Old 06-10-2012, 05:29 PM
  #6  
9 Second Club
iTrader: (11)
 
Carter01's Avatar
 
Join Date: Oct 2007
Location: South Ga
Posts: 1,828
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by lncboytre_d
Car info?
With him^^^^

Car is flying....
Old 06-10-2012, 06:12 PM
  #7  
TECH Fanatic
iTrader: (9)
 
Guitar's Avatar
 
Join Date: May 2011
Location: NC
Posts: 1,930
Likes: 0
Received 3 Likes on 3 Posts

Default

Nice.
Old 06-10-2012, 06:16 PM
  #8  
TECH Enthusiast
iTrader: (1)
 
Killer5.3's Avatar
 
Join Date: Oct 2009
Location: Ms
Posts: 500
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by Carter01
With him^^^^

Car is flying....
He has an add in the classifieds with all the info. Very nice car and setup.
Old 06-10-2012, 06:24 PM
  #9  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

I do have an add in the classifieds but that may be getting pulled. I put that up before I brought the car out for some tnt. Yesterday was the first time I had ran the car in 7 months. I swapped to the Trickflows and made a few other changes during the down time. As it sits it should trap 144-145 mph In the 1/4. I am changing rear shocks, tune on the car a little more and try to knock down a 5 second pass. If/when I do then I will run the 1/4 to see what she's got.
Old 06-10-2012, 07:38 PM
  #10  
10 Second Club
iTrader: (10)
 
Fbodyjunkie06's Avatar
 
Join Date: Mar 2009
Location: Greensboro, NC
Posts: 4,712
Likes: 0
Received 5 Likes on 5 Posts

Default

Atta boy Thadd, once you get those shocks we will try again I know it wouldn't hook, but you looked plenty happy just not having to replace any expensive parts afterwards.

And you know we have to get our race in too!

I thought it went 1.47 60' on the last pass it went 6.1 on? 4.01 330' too I think?

And thadd's car does back half hard as hell.

I hope mine comes close with correct bottle psi.
Old 06-10-2012, 09:04 PM
  #11  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Fbodyjunkie06
Atta boy Thadd, once you get those shocks we will try again I know it wouldn't hook, but you looked plenty happy just not having to replace any expensive parts afterwards.

And you know we have to get our race in too!

I thought it went 1.47 60' on the last pass it went 6.1 on? 4.01 330' too I think?

And thadd's car does back half hard as hell.

I hope mine comes close with correct bottle psi.
Yes I was plenty pleased. Keep me posted on when you are heading back to the track and I will see if I can get there the same night. It probably was a high 1.47 or 8 or something. But if it not low 1.3 or better its not doing what it should be and its crap lol. It's all about that 60ft. The rest is easy
Old 06-10-2012, 09:23 PM
  #12  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default



You were right on the 60, I was looking at the reaction time. And before anyone says anything about the reaction time, I was purposely taking my time.
Old 06-11-2012, 03:01 AM
  #13  
10 Second Club
iTrader: (10)
 
Fbodyjunkie06's Avatar
 
Join Date: Mar 2009
Location: Greensboro, NC
Posts: 4,712
Likes: 0
Received 5 Likes on 5 Posts

Default

Ol' Grandma on the tree......
Old 06-11-2012, 05:13 AM
  #14  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Fbodyjunkie06
Ol' Grandma on the tree......
Hahaha I know right! I'm hoping to get everything done to my car this week. I would like to take it to RPM's race on Saturday. You know the track will be on kill and it would be a good time to work on the set up
Old 06-11-2012, 09:47 AM
  #15  
10 Second Club
iTrader: (2)
 
SPRAYIN96TA's Avatar
 
Join Date: Apr 2006
Location: North Carolina
Posts: 224
Likes: 0
Received 0 Likes on 0 Posts
Default

Car looks like it's running good Thadd! I think I ran a 6.01@118 with a 1.38 60ft. I delayed it out but it still run good. In good air that's a 5sec ride all day. I got stuck on that 6.0 range for likenanyear then we threw the .028 in fogger and boom. Keep working on it man. Glad to see your still at it! I need to come to the track one night and check y'all out!
Old 06-11-2012, 10:20 AM
  #16  
10 Second Club
iTrader: (10)
 
Fbodyjunkie06's Avatar
 
Join Date: Mar 2009
Location: Greensboro, NC
Posts: 4,712
Likes: 0
Received 5 Likes on 5 Posts

Default

Originally Posted by SPRAYIN96TA
Car looks like it's running good Thadd! I think I ran a 6.01@118 with a 1.38 60ft. I delayed it out but it still run good. In good air that's a 5sec ride all day. I got stuck on that 6.0 range for likenanyear then we threw the .028 in fogger and boom. Keep working on it man. Glad to see your still at it! I need to come to the track one night and check y'all out!
Is this CJ???

Thadd I am hoping to make it Piedmont Thursday with my car. I won't be able to bring my to Benson. For one it's too far and two if Brian's car is ready I have to play pit bitch/race car tower to the lanes lol.

Remember the black dude Saturday night? With the 306 mustang that was gonna **** any street ls1 up we had? LOL I wish I would of had my car there, I'd of raced him then. You know his car has to weigh 200 pounds more than any of ours seeing as he weighed about 450lbs LOL!

Last edited by Fbodyjunkie06; 06-11-2012 at 10:29 AM.
Old 06-11-2012, 10:27 AM
  #17  
10 Second Club
iTrader: (10)
 
Fbodyjunkie06's Avatar
 
Join Date: Mar 2009
Location: Greensboro, NC
Posts: 4,712
Likes: 0
Received 5 Likes on 5 Posts

Default

Some pictures of Thadd's car from Saturday...

http://www.raceworksgallery.com/2012...s/grw_9363.htm


http://www.raceworksgallery.com/2012...s/grw_9364.htm

http://www.raceworksgallery.com/2012...s/grw_9486.htm
Old 06-11-2012, 04:54 PM
  #18  
8 Second Club
Thread Starter
iTrader: (12)
 
THADD's Avatar
 
Join Date: Nov 2010
Location: Durham
Posts: 747
Likes: 0
Received 0 Likes on 0 Posts
Default

I saw one if those but not the rest. Thanks for posting
Old 06-11-2012, 06:17 PM
  #19  
9 Second Club
 
Charles Cyrus's Avatar
 
Join Date: Aug 2003
Location: Raleigh NC
Posts: 604
Likes: 0
Received 0 Likes on 0 Posts

Default

Very Nice!!
Old 06-11-2012, 07:05 PM
  #20  
10 Second Club
iTrader: (16)
 
Sofls1's Avatar
 
Join Date: May 2009
Location: Miami, FL
Posts: 434
Likes: 0
Received 0 Likes on 0 Posts

Default

Congrats! car is moving! whats the setup? Weight?


Quick Reply: Stock Cube Nitrous Car Coming Around



All times are GMT -5. The time now is 12:57 PM.