Mounting the bottle on a C5 FRC...
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Dec 2005
Location: Seattle-ish, WA
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Mounting the bottle on a C5 FRC...
Where can I mount the bottle without hitting my tank drilling in?
I'd ideally like to mount it with the valve facing the back of the passenger seat, directly behind the seat on the trunk/sotrage floor on my FRC (basically as far front and right as possible in the trunk area when looking at the car from the rear)
Thanks guys
I'd ideally like to mount it with the valve facing the back of the passenger seat, directly behind the seat on the trunk/sotrage floor on my FRC (basically as far front and right as possible in the trunk area when looking at the car from the rear)
Thanks guys
#3
Staging Lane
iTrader: (3)
Join Date: Mar 2010
Location: dallas
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Where can I mount the bottle without hitting my tank drilling in?
I'd ideally like to mount it with the valve facing the back of the passenger seat, directly behind the seat on the trunk/sotrage floor on my FRC (basically as far front and right as possible in the trunk area when looking at the car from the rear)
Thanks guys
I'd ideally like to mount it with the valve facing the back of the passenger seat, directly behind the seat on the trunk/sotrage floor on my FRC (basically as far front and right as possible in the trunk area when looking at the car from the rear)
Thanks guys
2. pull back the carpet.
3. glue (superglue or another strong adhesive) the plywood to the trunk.
4. put carpet back
5. now you can drill into the plywood to hold your bottle bracket.
Personally I put mine in the center console of the trunk (I have a vert and a remote bottle opener) and I just drilled mine to the trunk. I figured I have to make a hole at the bottom of the tub for my blow down tube a few more holes wont hurt. hope this helps.
Last edited by igtabg1; 07-25-2012 at 12:57 PM. Reason: added pictures