white95gt

I'm buying a 01 ls1 short block it has been disassembled I am looking to build reassemble it buy some heads a carbd intake msd 6010 box etc and drop it into a fox body coupe. I am wanting to spray the motor with at least a 150 shot maybe a 175. I am gonna port/polish the heads and intake put a bigger cam and springs in. I am looking for about 600-700 crank HP on the nitrous. Is it possible? And how much nitrous will a stock bottom end ls6 hold

Nitro Dave's Nitrous Outlet

iTrader: (25)

Its possible. The question is can you tune it to make it last.

150 is the safe go have fun point on a stock bottom end. I have customers pushing 300-400 hp through the stock bottom end. It takes knowledge and baby steps to get it to live though.

Dave

87silverbullet

iTrader: (11)

The same setup you are talking about doing we have done with a fox body. It has a TSP torquer v2 cam and on a 175 shot it has ran 9.80's with out the box jetting. Still has more left in it with a little tuning, its running rich on the bottle and we have a decent amount of timing out of it. I can see this car ending up in the low 9's with more jet and tuning.

white95gt

I will have a local ls guy tune the motor for me once its in the car.

Blackpanther99

iTrader: (8)

175 is safe enough. Also depends on cam. Lots of people on here spray a safe 150 shot.