rlabar01

i have a 94 z28 ( lt1) mostly stock...

i want to spray 150 shot wet nitrous

i have a bottle, brackets, a intake elbow with a 6an jet fitting already in the casting. i will be purchasing a WOT switch, remote bottle opener, blah blah blah.

my biggest concern is how can i retard timing without having two tunes? i read up as much as i could on the MSD 6al box with a timing retard attachment. wich seems like it would work, but do i need a blaster coil, and an adapter harness etc. to run this set up?

i looked at the mallory 685 ignition but couldnt find alot of detailed info on the product.

whats the easiest way to pull a few degrees of timing with these lt1's?

dekan513

iTrader: (2)

not sure on the lt1 but i know alot of ls ppl use the home made resistor trick. might check on that.

brandon@nitrousoutlet

iTrader: (2)

The MSD and the Mallory are both good choices! The blaster is just a stronger coil over the factory unit.