ra79428

My controller is reading r2. Does anyone know how to get it to read rr?

03EBZ06

its LIVE on channel 2! Just figure out why its live and fix it, TPS, RPM, etc.

ra79428

I didn't hook up anything to channel 2.

brandon@nitrousoutlet

iTrader: (2)

You have the parameters in the controller configured so that it is trying to fire the 2nd channel. Run through the controller settings and move the 2nd stage activation rpm up out of the usable range.

ra79428

Ok, I will try that tonight, thank you

ra79428

What do you recommend i change the settings to on channel 2 so that it won't come on?

03EBZ06

set ACTIVATION RPM = 9900.

BoinaVerde

Yea, I know, old thread, but thought I'd post in case someone winds up here looking for an answer like I did. I had the same issue with the controller getting stuck showing r2 when I too had nothing set on the second channel. Changing the activation rpm to 9900 did not work for me. I finally changed the Throttle Position Activation Switch (TPAS) setting for channel two from 01 (hot WOT switch) to 00 (grounded WOT switch). I left the channel 1 TPAS setting at 01. This fixed it for me, YMMV.