G body-4L80-A/C-250 shot-Street car
#1
TECH Addict
Thread Starter
iTrader: (28)
Join Date: Sep 2008
Location: Deer park
Posts: 2,258
Likes: 0
Received 0 Likes
on
0 Posts
G body-4L80-A/C-250 shot-Street car
We'll i had no intentions of building another car but I could not pass up this g body malibu!! This baby is in its was from PA as we speak and it should get here Wednesday. I plan to have it ready by tx2k so I have already ordered everything and parts are coming in daily!
1978 G body malibu
6x,xxx on the clock
Porno red interior
Vortec 350 with th350
Grand national 8.5 rear end with 31 spline moser axles,true trac 3.70, billet caps and girdle.
Paid 4500 bucks!
Here are a few pics of the car.
Plan is to pull the motor and transmission as soon as she get here and this is the combo I'll be putting together.
LQ9 stock shortblock
Trickflow 205cc heads 58cc chamber (11.5:1)
23x/24x camshaft
Black Fast 102/ Black NW 102 TB
Nitrous outlet Plate (200-250) Hardlined -6 Feed
NOS Mini progressor 2
Speed engineering F body 1 3/4 headers and Y pipe to 3.5" single exhaust out the back with Magnaflow race muffler
Built 4L80E
Custom PTC converter 3400 on motor 4200ish on the gas
Iceman 4l80E crossmember
PSI harness
TRZ uppers and lowers
strange adjustable shocks front and rear
MT 275 Pro drag radials on the 15x8 torque thrusts
I plan to keep everything stock on the exterior and interior except lowering it and puting the pro drag radials. Goals for the car are to drive to the track with A/C, run a 10.7x on motor and 9.50 on a 250 shot and send the trailer cars packin while I drive off doing a huge burnout
stay tuned it should come together quickly.
1978 G body malibu
6x,xxx on the clock
Porno red interior
Vortec 350 with th350
Grand national 8.5 rear end with 31 spline moser axles,true trac 3.70, billet caps and girdle.
Paid 4500 bucks!
Here are a few pics of the car.
Plan is to pull the motor and transmission as soon as she get here and this is the combo I'll be putting together.
LQ9 stock shortblock
Trickflow 205cc heads 58cc chamber (11.5:1)
23x/24x camshaft
Black Fast 102/ Black NW 102 TB
Nitrous outlet Plate (200-250) Hardlined -6 Feed
NOS Mini progressor 2
Speed engineering F body 1 3/4 headers and Y pipe to 3.5" single exhaust out the back with Magnaflow race muffler
Built 4L80E
Custom PTC converter 3400 on motor 4200ish on the gas
Iceman 4l80E crossmember
PSI harness
TRZ uppers and lowers
strange adjustable shocks front and rear
MT 275 Pro drag radials on the 15x8 torque thrusts
I plan to keep everything stock on the exterior and interior except lowering it and puting the pro drag radials. Goals for the car are to drive to the track with A/C, run a 10.7x on motor and 9.50 on a 250 shot and send the trailer cars packin while I drive off doing a huge burnout
stay tuned it should come together quickly.