dekan513

iTrader: (2)

its starting to get warm and i put a standalone system on my c6 ls3 auto , with cam , 3200 stall , exhaust, tune. 150 shot atm. i got a weldon fuel pressure reg. and its adjustable for about any psi. 3-100 or something along those lines. what psi is the best and why. i was thinking about 40 and jet and go from there. nx dual stage 90 mm plate and noids , nx4 controller

shortdog

iTrader: (1)

I'm at 60 psi. IMO, higher psi will give you a larger margin for error as opposed to low psi (6-7 psi).

Bowtiedford

iTrader: (9)

I have a 2 stage Nitrous outlet plate with a stand alone and use 55 psi. as stated above margin for error is less with higher psi

NitrousExpress

iTrader: (4)

Correct. We have found that either pressure, low or high works fine when set up correctly. If you are on a small jet you may want to consider running low pressure out of your standalone on a direct port that way you don't have to run such a small fuel jet. Less chance of it getting clogged. Being that you are running a plate, I don't really see this being an issue for you. Our safe system comes with an Aeromotive regulator and a spring to swap between carb and EFI pressures. Please let us know if you come up with anymore questions.

Thanks,
Garrett

dekan513

iTrader: (2)

ty guys

brandon@nitrousoutlet

iTrader: (2)

It's really whatever you feel comfortable with. Make sure to get a quality flow tool to set the correct flowing fuel pressure.