tonyperez

I have a custom grind cam. I was wondering if it would work with nitrous . Any help would be appreciated. Thanks in advance. I have a ly6 with l92 heads holley intake turbo 350 tranny with a 3500 stall with 373 gears and a holley 750dpi.in a mustang. Specs are 243/254 624/595 108+3.

brandon@nitrousoutlet

iTrader: (2)

How much are you looking to spray?

speedtigger

iTrader: (16)

How high are you planning to spin this engine?

tonyperez

Brandon I was wanting to spray it with at least a 175 shot. And speedtiger was looking at about 6800 just depends. Thanks guy's.

NitrousExpress

iTrader: (4)

On 175 shot, it will probably work just fine, I would definitely give Martin @ Tick Performance a call if you are interested in finding out more about that cam or spec'ing a cam out for your application.

Thanks,
Garrett

brandon@nitrousoutlet

iTrader: (2)

If that's all you're wanting to put to it, I don't see a problem with that.

speedtigger

iTrader: (16)

I think that is a good looking single plane cam for a 7000+ RPM 6 liter. It has a good amount of overlap which will send some of your nitrous out the exhaust pipe, but I bet it will take a pretty good sized shot.

tonyperez

Alright guy thanks.