power loss on the juice
#1
power loss on the juice
I now this isn't the correct place too post this but looking for experience. I installed a 4150 plate kit on a ls408 and used a 62 no2 and 28 on fuel, when you full throttle above 3 grand it hits hard at first and then drops off. Its funny because the torque stays up. I'm only doing a 150 shot, any thoughts on this ?
Trending Topics
#9
Maybe bad fill on the bottle, I filled the one and grabbed one from a friend, so I'm at the track now so I'm going to see you it goes. I talked to Brondon @nitrous outlet and I lack a lot of info , thanks guys for the responses. When I get back home I will continue with this
#14
The readings I told you about are on a evil mustang dyno. I did not track just motor yet, I will if I can run 1 more time today. Thinking my problem will be with fuel pressure, I was watching the gauge on the rail and did drop down too 25 psi, just in part and doing some wot shots, so its time for a stand alone, hint, hint