NaSSty99

i got the n2o kit installed, i tried it and the nitrous and it didn't kick in untill 6k RPM, the window switch is set up between 3k and 6400 rpm, i removed the 3000 pill and tried it and it didn't kick in at all.
do you think it's the wiring, the pill itself or the window switch control module?

i got the NX wet kit with a 100 shot with the gen x
thanks,

Z28Venom

iTrader: (13)

Did you cut the loop on the MSD Window Switch so that it operates in 4-cylinder mode?

I read that the LS1 emits a 4-cylinder signal.

BMN

Has to be in 4 cyl mode.

NaSSty99

problem solved, i just cut the red and blue loop wires and it solved the problem,
thanks