MSD window Install. help me out.
09-30-2005, 06:49 PM
#1
Launching!
Thread Starter
Join Date: Jul 2005
Location: Jax, FL
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
MSD window Install. help me out. I have everything wired up right. white one is going to pin#10
When i turn it on it flashes "On". I push mode and it reads Zero. When i let go it goes back to "ON". An ideas? Do i have a bum Switch or am i just retarded
When i turn it on it flashes "On". I push mode and it reads Zero. When i let go it goes back to "ON". An ideas? Do i have a bum Switch or am i just retarded
10-01-2005, 09:59 AM
#4
Launching!
Thread Starter
Join Date: Jul 2005
Location: Jax, FL
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
it's not reading any rpms
i'm tapped into #10. I even double checked my connection. I put a test light on the wire right next to the box and it pulses a signal.
i'm tapped into #10. I even double checked my connection. I put a test light on the wire right next to the box and it pulses a signal.