biggdogg

iTrader: (2)

horsepower 451 torgue 585 what times think it will run in the 1/4 mile.Its a 1999 C5

mike c.

iTrader: (1)

on 455hp in my f-body m6,i ran 10.89@126mph. the 100 shot gave over .8 in the 1/4mi.

Hennytime

iTrader: (33)

so was it 455hp before or after the 100 shot?

redsscamaroboy

iTrader: (7)

Greatly depends on driver ability and the rest of the car's set-up.

I know a guy with a stalled A4 that dyno'd 456/510 HP/TQ and he ran 10.86@124 1.46 60FT.
light weight car 99 1LE SS A4.
Lots of suspension mods: K-member,QAI's, light weight wheels and skinnies,Kirkey seats and E/T streets.
Light weight carpet etc....

Dave

XTrooper

With my heavy chrome wheels and tires and a race weight of 3550, I've run a best of 11.478@121.55 mph on a 75 shot. I dynoed at 441 rwhp on the same 75 shot. Not sure what my peak torque numbers are because we didn't start spraying on the dyno till the motor hit 4000 rpm.

biggdogg

iTrader: (2)

Went to track last night here are the numbers 60ft. 1.601 330ft 4.570 1/8 7.067 mph 96.92 1/4 mile 11.053 mph 123.88. wanted better but thats the way it goes.

Airwolf

iTrader: (2)

If the 451 HP was WITH the nitrous, then running a 11.05 is great!
If the 451 hp was before the nitrous, then you are in the range I would expect and mph would be lower then I expect.

Robert56

iTrader: (2)

The run in my sig was with about 450rwhp and hitting rev limiter going into 4th gear, which knocked about .100 off my time. Also some spin on launch with BFG drs. I know I have more left, and I think you do also, keep at it you'll knock a little more off your time.
Robert