Adapter
04-25-2006, 10:16 PM
#1
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Adapter I went with a larger nitrous noid ( Nitro Daves Plate kit) & my old filter/purge setup will not fit into the noid, it's too small. I believe the filter is a male 1/8 NPT, is there an adapter to go to the larger noid? It's kind of urgent as I have my first car event this friday. Hopefully it's something I can get at NAPA.
04-25-2006, 10:50 PM
#3
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitro Dave's Nitrous Outlet
The inlet fitting on the nitrous solenoid is a 1/4 npt. WE have fileter fittings in stock that will work. You may try local speed shops..
Dave
Dave
Thanks,
04-25-2006, 10:56 PM
#5
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitro Dave's Nitrous Outlet
Ok.. Do you have the NX solenoids with the purge port desighn?
Dave
Dave
Last edited by code4; 04-25-2006 at 11:01 PM.
04-25-2006, 11:04 PM
#6
OK,
THe hole in the bottom is the feed out to the plate.. The hole in the side the oposite side of the inlet port is your purge port. If you screw the fitting out of the manafold that goes to the solenoid it will now screw directly into the purge port on the solenoid.
You will illiminate the manafold..(no longer used)
THis will clean it up..
The bad news is that that filter will no longer work. The side that screws into the solenoids needs to be a 1/4 npt.
However you can get rid of that filter and use one of these.
http://www.nitrousoutlet.com/catalog...del=78&dept=11
THese filters are best placed at the back of the car..
I hope this helped.
Dave
THe hole in the bottom is the feed out to the plate.. The hole in the side the oposite side of the inlet port is your purge port. If you screw the fitting out of the manafold that goes to the solenoid it will now screw directly into the purge port on the solenoid.
You will illiminate the manafold..(no longer used)
THis will clean it up..
The bad news is that that filter will no longer work. The side that screws into the solenoids needs to be a 1/4 npt.
However you can get rid of that filter and use one of these.
http://www.nitrousoutlet.com/catalog...del=78&dept=11
THese filters are best placed at the back of the car..
I hope this helped.
Dave
04-25-2006, 11:07 PM
#7
9 Second Club
Thread Starter
iTrader: (30)
Join Date: Apr 2004
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nitro Dave's Nitrous Outlet
OK,
THe hole in the bottom is the feed out to the plate.. The hole in the side the oposite side of the inlet port is your purge port. If you screw the fitting out of the manafold that goes to the solenoid it will now screw directly into the purge port on the solenoid.
You will illiminate the manafold..(no longer used)
THis will clean it up..
The bad news is that that filter will no longer work. The side that screws into the solenoids needs to be a 1/4 npt.
However you can get rid of that filter and use one of these.
http://www.nitrousoutlet.com/catalog...del=78&dept=11
THese filters are best placed at the back of the car..
I hope this helped.
Dave
THe hole in the bottom is the feed out to the plate.. The hole in the side the oposite side of the inlet port is your purge port. If you screw the fitting out of the manafold that goes to the solenoid it will now screw directly into the purge port on the solenoid.
You will illiminate the manafold..(no longer used)
THis will clean it up..
The bad news is that that filter will no longer work. The side that screws into the solenoids needs to be a 1/4 npt.
However you can get rid of that filter and use one of these.
http://www.nitrousoutlet.com/catalog...del=78&dept=11
THese filters are best placed at the back of the car..
I hope this helped.
Dave
Trending Topics
04-26-2006, 02:27 AM
#9
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
That would have been rather funny at your cost, go to purge and blow 150shot worth of nitrous, and then go to run on smaller flow. OMG..good catch guys.