Pics of Daves Plate Installed!
#1
10 Second Club
Thread Starter
iTrader: (47)
Join Date: Nov 2001
Location: Pace, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Pics of Daves Plate Installed!
Been working on getting it how I wanted it. Got a plate from Dave and sanded it down and polished it up. Built aluminum brackets for the Lighting noids, measured out custom lines, and tried to make it as clean as possible. All the wires are tucked under the cowl in loom. All I got left to do is run the purge line and it is all done. BIG thanks to Dave, Chris, and the guys at NX for the parts and all the help.
John
John
Trending Topics
#16
10 Second Club
Thread Starter
iTrader: (47)
Join Date: Nov 2001
Location: Pace, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the props guys! It took me a lil while, but I'm real happy with the results. Should have it on the dyno next week and see what we got!
Swanner,
I'll be sure to drive it that day! We will have my parking lot wrapped up!
xaon,
It is a 4 inch pipe. When I had the MAF on it was a 4in reduced to a 3.5 for the MAF.
Swanner,
I'll be sure to drive it that day! We will have my parking lot wrapped up!
xaon,
It is a 4 inch pipe. When I had the MAF on it was a 4in reduced to a 3.5 for the MAF.
#18
10 Second Club
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by John02SS
Thanks for all the props guys! It took me a lil while, but I'm real happy with the results. Should have it on the dyno next week and see what we got!
Swanner,
I'll be sure to drive it that day! We will have my parking lot wrapped up!
xaon,
It is a 4 inch pipe. When I had the MAF on it was a 4in reduced to a 3.5 for the MAF.
Swanner,
I'll be sure to drive it that day! We will have my parking lot wrapped up!
xaon,
It is a 4 inch pipe. When I had the MAF on it was a 4in reduced to a 3.5 for the MAF.