ls6 nos setup!? cadt cts v.....tnt kit
04-02-2007, 02:00 PM
#1
Teching In
Thread Starter
Join Date: Mar 2007
Location: moriah new york
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
ls6 nos setup!? cadt cts v.....tnt kit ok guys my boss bought a tnt nos kit. The mounting hardware is a joke and doesnt fit...at all..they claim it does but trust me as a fellow certified tech is does not! The kit is nice stuff and clean. I was wondering if anyone has put a kit any kit on a cady cts v like his? There isnt a lot of room but enough.....any help is awesome!!!
04-02-2007, 02:02 PM
#2
TECH Fanatic
iTrader: (1)
Join Date: Mar 2004
Location: Southern NH
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics of Nitro Daves Plate kit on a CTS-V
http://www.860performance.com/04CTS-V.html
That car flew! 121mph in the 1/4!!!
http://www.860performance.com/04CTS-V.html
That car flew! 121mph in the 1/4!!!
04-02-2007, 07:36 PM
#3
Teching In
Thread Starter
Join Date: Mar 2007
Location: moriah new york
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the link...my texas kit sent me a ring that goes between the throttlebody and the inlet pipe...the ring is a good idea but the solenoid mounting braket wont even come close to fitting...ill have to make a custom braket.Is there any way to contact him about his car and any hints he might have!?
04-02-2007, 08:58 PM
#4
TECH Fanatic
iTrader: (1)
Join Date: Mar 2004
Location: Southern NH
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
I did the install, let me know if you have any questions during the install.
Vinny
Vinny
Originally Posted by commpartspro
thanks for the link...my texas kit sent me a ring that goes between the throttlebody and the inlet pipe...the ring is a good idea but the solenoid mounting braket wont even come close to fitting...ill have to make a custom braket.Is there any way to contact him about his car and any hints he might have!?
04-03-2007, 07:36 AM
#5
Teching In
Thread Starter
Join Date: Mar 2007
Location: moriah new york
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
thank you!! ill get some pics...oh did you see the extra hole in the holders of the fuel lines! I ran the nos line in the empty holes! worked trick and you dont even notice the braided line!!
