wiring diagram of 2 step, NOS throttle switch and transbrake?
03-30-2008, 08:23 PM
#1
9 Second Club
Thread Starter
iTrader: (3)
Join Date: Jul 2003
Location: pa
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
wiring diagram of 2 step, NOS throttle switch and transbrake? I would like to install my 2 step to work with my set up I am running currently.
I need to 2 step and transbrake at 2000 rpm or so and have my NOS deactivated when my microswitch (gas pedal) is on. Then when my transbrake is activated(button let go) the NOS is on.
I am sure you guys follow me.
any help would be great .
I need to 2 step and transbrake at 2000 rpm or so and have my NOS deactivated when my microswitch (gas pedal) is on. Then when my transbrake is activated(button let go) the NOS is on.
I am sure you guys follow me.
any help would be great .
03-31-2008, 07:24 AM
#2
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
I would like to install my 2 step to work with my set up I am running currently.
I need to 2 step and transbrake at 2000 rpm or so and have my NOS deactivated when my microswitch (gas pedal) is on. Then when my transbrake is activated(button let go) the NOS is on.
I am sure you guys follow me.
any help would be great .
I need to 2 step and transbrake at 2000 rpm or so and have my NOS deactivated when my microswitch (gas pedal) is on. Then when my transbrake is activated(button let go) the NOS is on.
I am sure you guys follow me.
any help would be great .
03-31-2008, 08:48 AM
#4
TECH Fanatic
iTrader: (3)
Join Date: Jun 2003
Location: El Paso
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
yellow wire to terminal 85, 12V to terminal 86. Intercept your power feed or WOT switch arming for the system. Basically cut that circuit, and splice in the relay using terminals 30 and 87a. When the 2 step activates, the relay should open and disconnect the 30 and 87a terminals. Those are the normally closed connections of the relay
Depending on how you wire it, you can use 87 to run a light or something if you have 12v on terminal 30.
Depending on how you wire it, you can use 87 to run a light or something if you have 12v on terminal 30.
03-31-2008, 08:55 AM
#5
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
yellow wire to terminal 85, 12V to terminal 86. Intercept your power feed or WOT switch arming for the system. Basically cut that circuit, and splice in the relay using terminals 30 and 87a. When the 2 step activates, the relay should open and disconnect the 30 and 87a terminals. Those are the normally closed connections of the relay
Depending on how you wire it, you can use 87 to run a light or something if you have 12v on terminal 30.
Depending on how you wire it, you can use 87 to run a light or something if you have 12v on terminal 30.
03-31-2008, 10:45 AM
#6
TECH Fanatic
iTrader: (3)
Join Date: Jun 2003
Location: El Paso
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
why? my window/tps switch are tied into the ground of the system relay. he could also intercept the power feed from the system relay to the noids and splice in there.
Trending Topics
03-31-2008, 11:53 AM
#9
8 second mod
iTrader: (37)
Join Date: Nov 2002
Location: East Side Performance! mASShole
Posts: 17,879
Likes: 0
Received 0 Likes
on
0 Posts
true, you could do that. i run mine in line tho, t-brake to my 2 step to my timmer to my noids with the relays in between. but you can do it that way as well
brake, controller, diagram, nitrous, oxide, relay, schematics, step, trans, transbrake, transbrakenos, wire, wires, wiring, yellow
