bowe1632

iTrader: (1)

my mods are below....would it be safe to run a 50 or a 100 shot...i want nothing more than 50 or 100 until i forge...my cousin is pushing me towards a dry system...but i was always under the assumption that wet is somehow better...any advice would be appreciated!!

Mike@HSW

iTrader: (6)

Sure you could run a shot in that range. A dry shot would be very simple to run, while it can prove to be a little harder to tune a dry shot does have a lot of advantages over wet.

00WickedRedTA

iTrader: (3)

I would spray 100 shot... just make sure it's tuned well, and your injector duty cycle isn't too high.

quickblade

Yes I would agree with these guys and say go with a 100 dry...

jmill96Z

iTrader: (3)

My vote would be 150 wet. Just get a 255 pump

bowe1632

iTrader: (1)

yea i have a 255 walbro pump sitting around...with the dry what size injectors should i make sure i have?

00WickedRedTA

iTrader: (3)

I have Lucas 42lb injectors, which I think is overkill for now, but will keep me from having to upgrade when I do heads/cam/etc. Since you already have a 255 pump, wet might be a better option for you. Good luck.

jmill96Z

iTrader: (3)

I think 42's would be good for 100 dry and your mods.