Winter Mods,,, Post Up Your Plans!!!!
#1
Winter Mods,,, Post Up Your Plans!!!!
I couldn't remember if this had already been posted this year or not. Post up your winter plans for your rides, unless this was already covered in another post. ? Feel free to post up some pics of your rides too if ya want.
Most of you already know, but I finally got my LS1 installed so now I've got some things to tidy up and long wish list of upgrades. Some will happen this winter, some will have to wait. I don't know about the rest of you, but I was layed off since June of this year and just recently got picked up with another engineering firm. It was rough being layed off at first (too much time on my hands), but I got alot accomplished and was probably a well needed break from the norm.
So anyway, here are some things I'd like to get done this winter.
-TSP 1-7/8" Headers / Offroad Ypipe
-Moser 9" w/4.11's
-ABS Delete / Line Lock
-BMR Adj TQ Arm
-255 In Tank Pump
-Revise Fuel Lines
-Dyno Tuning, mostly idle and drivabilty issues
-SS Hood
-SS Rear Spoiler
Here are a couple shots as of late. I finally got the chrome ZR1's I've always wanted. 17x9/17x11 of course!!
Mike
Most of you already know, but I finally got my LS1 installed so now I've got some things to tidy up and long wish list of upgrades. Some will happen this winter, some will have to wait. I don't know about the rest of you, but I was layed off since June of this year and just recently got picked up with another engineering firm. It was rough being layed off at first (too much time on my hands), but I got alot accomplished and was probably a well needed break from the norm.
So anyway, here are some things I'd like to get done this winter.
-TSP 1-7/8" Headers / Offroad Ypipe
-Moser 9" w/4.11's
-ABS Delete / Line Lock
-BMR Adj TQ Arm
-255 In Tank Pump
-Revise Fuel Lines
-Dyno Tuning, mostly idle and drivabilty issues
-SS Hood
-SS Rear Spoiler
Here are a couple shots as of late. I finally got the chrome ZR1's I've always wanted. 17x9/17x11 of course!!
Mike
Last edited by Mikey 97Z M6; 11-16-2008 at 09:49 PM.
#2
11 Second Club
iTrader: (12)
Join Date: Sep 2003
Location: Monroe Wa.
Posts: 1,389
Likes: 0
Received 0 Likes
on
0 Posts
Your car looks great Mike. That is a very nice list of things you are going to do. On my wish list is: Dana 60, New Nitro Daves Plate kit, and a new Cam spec'd to my Mod's. The only thing I am sure of is the Cam. The rest is if I can come up with the MOOLAH!!!!!
#4
TECH Fanatic
iTrader: (7)
Join Date: May 2003
Location: Valley Center KS
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm pretty much ready for paint on my pickup. While the firewall is getting painted I'll be working on some of the engine wiring and a few other things. The when I get the cab back from paint, I'll finish up the rest of the wiring, brake lines, tranny cooler lines and make it moveable under it's own power. Then it will all go in for paint.
Once it gets back from paint, I'll pretty much only have the interior to put together. Hopefully that will be accomplished by march.
Here's where I'm at now:
Oh, and I finished up de-modding the vette today. I can't believe how quite the stock exhaust is!
Once it gets back from paint, I'll pretty much only have the interior to put together. Hopefully that will be accomplished by march.
Here's where I'm at now:
Oh, and I finished up de-modding the vette today. I can't believe how quite the stock exhaust is!
#6
On The Tree
Join Date: Oct 2006
Location: Lawton (Fort Sill), Ok
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I am looking into buying a truck now so I can stop driving my T/A. If I can do that I have quite a few plans for suspending, induction, exhaust, and brakes. That's my focus right now. I'll start with suspension... just ordered an adjustable PHB the other day and there's more to come. My non ram air hood is peeling all of a sudden so a RA hood is one of the first things on my list. We'll see how it all goes.
#7
TECH Enthusiast
iTrader: (3)
Join Date: Oct 2006
Location: Idaho
Posts: 540
Likes: 0
Received 0 Likes
on
0 Posts
Mods i plan on ordering:
-Yank SBS 3800 2.55STR Converter (just got the other day in the mail)
-PermaCool Trans Cooler
-PaceSetter's Ceramic Coated 1 3/4" L/T's Race (Just ordered, waitin on UPS!)
-SLP Lid
-SLP Smooth bellow
-TSP 3" True Duals w/ Dynomax Bullets
-P&P Stock TB
-!AIR
-BMR SFC'S & Rear Lowering Springs
-New MT ET Street Radials
Ill get pics soon, as the mods start flowing in.
-Yank SBS 3800 2.55STR Converter (just got the other day in the mail)
-PermaCool Trans Cooler
-PaceSetter's Ceramic Coated 1 3/4" L/T's Race (Just ordered, waitin on UPS!)
-SLP Lid
-SLP Smooth bellow
-TSP 3" True Duals w/ Dynomax Bullets
-P&P Stock TB
-!AIR
-BMR SFC'S & Rear Lowering Springs
-New MT ET Street Radials
Ill get pics soon, as the mods start flowing in.
Last edited by LS1_K1DD; 11-22-2008 at 08:28 AM.
Trending Topics
#8
11 Second Club
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
I will be doing the Wallet mod... Selling the car more than likely
If something does turn around, then I want to try and just fix the little things and get a good tune on it.
If something does turn around, then I want to try and just fix the little things and get a good tune on it.
#10
Thanks Doug and Ellis. It's nice to be back in the driver seat of the Z28 again. I actually got to drive it to the alignment shop and back on Saturday, and it's quite a beast, even with the 3.42's. I don't have it tagged yet, hasn't been tagged since 04', so I haven't really got to drive the car around at all.
Ackattack, that truck of yours is looking cool as hell. Does it have air bag suspension? I have a buddy that is having a 69 stepside done, LS1, bagged, and full C4 suspension front/rear. Kustom Rides in Portland is doing the work for him.
Cody, the first month for me was the hardest. After that I found all kinds of things to occupy my time. Now it's hard getting back into the work thing again. I'm used to having so much free time. Now I need to remember to get **** done on the weekends haha... If you need a hand with your car man, I'm a just a phone call away, but you already know that.
Let's hear some more mods out there.... Bobby...........? Is there a whipple in your future????
Mike
Ackattack, that truck of yours is looking cool as hell. Does it have air bag suspension? I have a buddy that is having a 69 stepside done, LS1, bagged, and full C4 suspension front/rear. Kustom Rides in Portland is doing the work for him.
Cody, the first month for me was the hardest. After that I found all kinds of things to occupy my time. Now it's hard getting back into the work thing again. I'm used to having so much free time. Now I need to remember to get **** done on the weekends haha... If you need a hand with your car man, I'm a just a phone call away, but you already know that.
Let's hear some more mods out there.... Bobby...........? Is there a whipple in your future????
Mike
#11
On The Tree
iTrader: (4)
Join Date: Jul 2008
Location: St. Helens, Oregon
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I feel odd hanging out on an ls1 site with my v6. But this is one of the few forums with a a lot of NW f-body guys, big site too, lots of very good info.
For the camaro:
PowderCoat the wagon wheels I just got
Sell my old wagon wheels and y2k's
New tires
Koni shocks
Strano lowering springs
Replace my dead lsd (clutches are shot)
Polish and wax
New exhaust tips
For the camaro:
PowderCoat the wagon wheels I just got
Sell my old wagon wheels and y2k's
New tires
Koni shocks
Strano lowering springs
Replace my dead lsd (clutches are shot)
Polish and wax
New exhaust tips
#12
#13
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
Nice rear end Don!
Oh, and nice car & list Mike. Should be a lot of fun when you get her done. When did you get that?
My list is short this winter. (like I need to do anything else) But I'm putting a cage in the car & Ellis is building a TH400 with a T-brake for me. About the only other thing I'll need is a parachute.
Oh, and nice car & list Mike. Should be a lot of fun when you get her done. When did you get that?
My list is short this winter. (like I need to do anything else) But I'm putting a cage in the car & Ellis is building a TH400 with a T-brake for me. About the only other thing I'll need is a parachute.
#15
Banned
iTrader: (12)
The rides looking great Mike!
Winter mods:
Lloyd Elliott cam
Lloyd Elliott LE2 heads
Lloyd Elliott ported intake
LPP long tube's
trickflow pushrods
LS7 lifters
CC valve springs
BBK 58mm
chrome valve covers
alternator relocate kit
37# injectors
air/egr
Nitto DR's
Tune
a/c delete
Yank SS3600 Stall
Winter mods:
Lloyd Elliott cam
Lloyd Elliott LE2 heads
Lloyd Elliott ported intake
LPP long tube's
trickflow pushrods
LS7 lifters
CC valve springs
BBK 58mm
chrome valve covers
alternator relocate kit
37# injectors
air/egr
Nitto DR's
Tune
a/c delete
Yank SS3600 Stall
#16
On The Tree
iTrader: (10)
Join Date: Oct 2008
Location: Little Rock, AR
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Mods in December include:
Mac Mid tube headers, y-pipe, and Magnaflow cat from Elliot's94Z
Prothane Motor mounts
Autolite X-treme irridium spark plugs
New O2 Sensors
MSD Super Conductor OTVC Wires
Fix a oil leak from the oil level sensor and drain plug
Tune
Mac Mid tube headers, y-pipe, and Magnaflow cat from Elliot's94Z
Prothane Motor mounts
Autolite X-treme irridium spark plugs
New O2 Sensors
MSD Super Conductor OTVC Wires
Fix a oil leak from the oil level sensor and drain plug
Tune
#19