Attn WAHUSKER
#1
TECH Fanatic
Thread Starter
iTrader: (7)
Join Date: May 2003
Location: Valley Center KS
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
Attn WAHUSKER
I finally got some time to do a test piece.
The picture is a quick test piece. Half of the piece was polished to a mirror finish, the other was bare aluminum. In the picture its hard to tell, but even the bare piece looks pretty good (and the metal finish on your brackets is better)
I should get a chance to get them done this weekend.
Sorry it has taken awhile, but work has been busy.
The picture is a quick test piece. Half of the piece was polished to a mirror finish, the other was bare aluminum. In the picture its hard to tell, but even the bare piece looks pretty good (and the metal finish on your brackets is better)
I should get a chance to get them done this weekend.
Sorry it has taken awhile, but work has been busy.
#2
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
With the glare it is hard to tell. One side looks different. From the pic, the right side looks like a perfect match. But the flash washes out the color on the left side. Either way it will look better than the bare aluminum bracket, so do what you think will work.
No problem on the timing Derek. I have been SO busy with my son's graduation & all the OT I'm putting in I wouldn't have time to install them anyway. And Boyce doesn't have his new motor yet, so I have a little time. If you get them done this weekend, I can get them on next weekend....that should be fine. Let me know how much $ & how you want me to get it to you. Thanks!
Mark
No problem on the timing Derek. I have been SO busy with my son's graduation & all the OT I'm putting in I wouldn't have time to install them anyway. And Boyce doesn't have his new motor yet, so I have a little time. If you get them done this weekend, I can get them on next weekend....that should be fine. Let me know how much $ & how you want me to get it to you. Thanks!
Mark