2000Hawk#317

iTrader: (3)

Had the window down and went to opened the door and it made the loudest pop sound I have ever heard from a door.
What happened, is that the door on the front half under the mirror, had come un-glued and with the window down, caused the exterior door panel to bow out slightly. When I tried to open it, it cought on the front quarter panel. There is no paint there anymore.
What compuind/adhesive should I use to get this to stick?

MM98

iTrader: (13)

3M panel bond, part # 08115 & the manual applicator # 08117.. Might be best to pull the door so you can get the surface really clean & clamp the skin down til the adhesive can cure.

3gensoffs

^^^^ what he said. seems like this may be a common issue. i saw a post on the same issue a while back. anyone else had this problem?

2000Hawk#317

iTrader: (3)

Thanks. I did pry on it a little with a flat head to show these pictures. Can still open and close the door. But want to fix it before it's sitting on the road or something crazy... Thanks again

PrplTA01

iTrader: (1)

I have seen this a couple times as well.. The 3M panel bond will fix you right up!

chromeplated500

iTrader: (10)

I did this a few years ago to another car I had, i was a little blown away at first. Had a body shop squirt glue in and sent me home!

2000Hawk#317

iTrader: (3)

I just bought the car too. Luckly found it in front of the dude I got it from. He didnt know about it so we took care of it. I've never seen this before so I figured someone would know the right combo to make it work. It was just crazy when we first saw it. Thanks again