Simon Pheonixxx

I have a 2000 Z with auto windows, I have replaced everything I could think of and they won't roll up, or down !!! The motors seem to be good Cause they worked for about five minutes. I did everything short of pulling the dash to trace wires back any further, I pulled doors spliced wires and replaced swithces. What am I missing ??? Any help would be appreciated...Thanks

ws6pont

iTrader: (2)

Did you try checking or replacing the relays for the motors?

Simon Pheonixxx

Nah have not tried that yet... They are up under dash? If so do I need to remove the dsh to get to them? Hopefully not, but If yu could point me in the right direction i would really appreciate it bro

samson_420

iTrader: (1)

Could be the switches. Did you check for voltage at the motors?

Simon Pheonixxx

Not officially no ... but the switches seemed to be good cause they rolled up and down for about five minutes or so after I first installed new motors. . . . It seemed they just quit on me after i got everything put back together and I haven't been able to get them to budge since. I will check the voltage and see if there is power gettin to them... Thanks bro

Marc3.4V6

iTrader: (1)

judging by the section you chose to post in, perhaps you put them in wrong?

99345hp

ummmmm...when you have a problem dont just go replacing parts. Diagnose the problem, then replace parts. It will save you ALOT of time and money. Go to a auto parts store and buy a cheap test light. Check voltage at the motor. If you have voltage at the motor, then its the motor. If you dont, start tracing backwards until you find the component that has voltage coming into it, but not out. Its that easy.

Simon Pheonixxx

Aight ... Thanks for the info bro I'll get it done.

Simon Pheonixxx

No need to be an ***!... I was just asking for some help

Mad-Max

When you installed the new motors did you clamp the window track to the inside of the door while the window was in the full up position?

Nauty99SS

there is atleast 1/2 dozen threads with window and other mis. installs on this section .. pay this bonehead no mind .. do like 99345hp said , buy you a test light or cheap multimeter and work back from the motors until you find power..

Simon Pheonixxx

Hey thanks thanks a lot bro.... I was just asking for help and with the exception of that guy, there are a lot of good guys on tech. Been on tech for a little while and i'm not paying that dude any mind at all. I appreciate all ya'll for the support.

By the way, Your car looks badass!

Simon Pheonixxx

I had it about three quarters of the way up, after I got everything hooked up, it went up and never came back down... Soon as I get her out the shop I'm going to do the voltage test.

Nauty99SS

thanks .. and i'll keep check on the thread .. i'll help all i can
and you've been judged !!! LOL cool name dude

OUTLAWZ RACING

iTrader: (9)

Just say " SIMON SAY'S WINDOWS ROLL UP" And they will work! LOL

Simon Pheonixxx

HA HA HA!! Thanks Nauty99SS...............OutlawzRacing .... I'll give that a shot! LOL

Car is getting painted right now so I won't get to it for about a week or so.... I'll get it right though as soon as I get her back. I'll post pics too on this thread after I got to the shop this weekend and check on her.

B T

Nice thread over here---->https://ls1tech.com/forums/showthrea...678&highlight=

You could probably search for a bunch of threads like this one.



Good luck!



BT

99345hp

no problem man, i'm more than willing to help someone. If I ever have a problem I will definately ask questions here first, because everyone on here is really helpful. There are some exceptions, but for the most part everyone is helpful. Good luck with the fix and I hope the paint turns out good.