Turbo Car Part Out
03-16-2012, 08:47 AM
#1
Turbo Car Part Out Category: Accessories
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Brand New
Engine: LS1/LS6
LS Engine?: Fits LS Engine
1999 Chevy Camaro Z28: 67,000 original miles, rally red t-top car, 10 point wolfe cage, wolfe mini tub and wolfe offset LCA's, Strange 3" narrowed 12 bolt with 40 spline gun drilled axles, BMR extreme torque arm, Spohn upper and lower A-arms, Strange race brakes all the way around with a Strange manual master and line lock, BMR turbo k-member, Flaming River manual rack, Hurst reverse manual TH400 shifter, Kirkey seats, Weld Magnum 15x10's in the rear with a Mickey Thompson 325 radial and Weld Magnum 15x3 front with Mickey Thompson ET fronts. The car also has a chute mount and the cage has been professionally painted black. The car also has a brand new VFN fiberglass Sunoco hood and a BMR battery box with power cutoff in the rear. It has full carpet, dash, and center counsel. Also included with the car is a brand new Griffin radiator. I am asking $12,000 for the roller.
Engine: 415CI LS6
A little about the motor, all forged internals, built for boost, studded heads and all ARP fasteners, Evans water pump, Nasty Performance valve covers, T&D rockers, solid roller motor, MSD high torque starter, Edelbrock Victor Jr. coated intake with FAST 102mm TB, Bocsh 160lb injectors, ATI dampner with AVIAD 3 stage dry sump and flat dry sump pan with 3 gallon oil tank. It also has the alternator on it as well with a adjustable tensioner. Cost of the motor and all accessories on it with all oil lines and AN fittings for oil system: $14750
I will sell the motor alone as listed above for $10,000.
Trans: Rossler TH400 Reverse manual valve body with Neal Chance Converter and Lokar dipstick. Cost: $4700
I will let the trans and converter go with the Lokar dipstick for $3000.
Fuel System: Nasty Performance sumped tank with all Magna fuel pump and boost regulator all lines and AN fittings: $2800
I will sell this setup for $2500 as this is the 2000 hp setup.
Engine Management: Big Stuff 3 with all harnesses with initial startup tune already on the box. Cost $3600
I will sell this for $3200 and this comes with the 24 tooth reluctor wheel.
Turbo Setup: Shearer Performance turbo set up, headers, crossover, all lines and fittings, all hotparts are coated, all V-bands, and full exhaust to the back of the car, Tial blowoff and wastegate, Precision 88mm Promod turbo with coated exhaust, huge 6" air to air intercooler and all other parts to assemble. Cost: $11700
I will sell this setup for $8000.
Keep in mind every part on this car is brand new. PM me or email me with any offer or questions. You can even text me at 313-790-5592. I have a daughter now and I just don't have the time to put into the car to finish.
Thanks.
Tony
Trending Topics
03-18-2012, 09:16 PM
#10
On The Tree
Join Date: Jul 2008
Location: houston, tx
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
