FS: LT1 Fbody odds n ends...Updated w/Pics
#1
FS: LT1 Fbody odds n ends...Updated w/Pics
Category: Drivetrain
Price: $0
Part Fits: 93-02 Chevrolet Camaro
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LT1/LT4
LS Engine?: Non-LS Part
- 1 - Aluminum drive shaft(stock, no yokes/ujoints) $80
- 8 - .150 offset roller 1.6 ratio 7/16" stud rockers (new, never used) The kit (Part# 20116) sells for $119.xx when new on Jegs. I'll sell the kit for $80. (picture of one of them with the CC ProMags below...)
- 1 - ILE intake bellows (one hole in it for dry nitrous shot) $40
- 1 - Used T56 six speed tranny $700
- 1 - Ebony drivers side kick panel $45
- 1 - Ebony passenger side kick panel. $45
- 16 - CC Promag 1.6 ratio 7/16" stud non-self align.(They have clearancing for 1.55 Springs) $100 Sold to Kurt!
- 8 - Isky adjustable pushrod guide sets. $20 Withdrawn. Found out the set it missing one piece(dammit..)
- 1 - Pair Canfield heads (2.05/1.60 valves)(fully cleaned and valves lapped) $900 Sold to Sean!
- 1 - Stock intake(fully cleaned) $80
- 1 - 96/97 Timing cover(fully cleaned) $50Pending Sale to Johnny S.
- 1 - Set used ARP 170,00 psi SBC/LT1 head bolts(ARP kit 134-3601) $30 Pending
Pictures coming soon.
Thanks!
Last edited by mightyquickz28; 05-28-2012 at 05:55 PM.
#6
Okay, thanks.
On the Jegs, I want to be clear....
These Jegs are offset .150" for heads/Intake (only) valves that require the offset to align the pushrods.
If you have stock heads/valve placements, you won't want these for that engine. Just a reminder
On the Jegs, I want to be clear....
- Ratio: 1.6
- Stud: 7/16"
- Quantity: 8.
- Offset: .150
These Jegs are offset .150" for heads/Intake (only) valves that require the offset to align the pushrods.
If you have stock heads/valve placements, you won't want these for that engine. Just a reminder