CRL 01 SS

iTrader: (4)

Category: Engine - Complete Motors
Price: $5000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): AL
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine

I've decided to sell the SDPC/Vengeance Racing LS2 402 that was in my 2001 Camaro SS. The motor has right at 10,000 miles on it. This motor put down 500 rwhp in my car through a T56, 9" with 315s on the rear on the Mustang Dyno at SpeedSouth in Pelham, AL. Jim at SpeedSouth said there was still some left in the tune too. This motor was previously in a friends 2002 Camaro Z28 and it ran 10.90s NA with stock suspension the only time it was ever taken to the track. I never got a chance to take my car to the track to see what it would run. This motor has been well maintained and never been abused or sprayed. These are the specs off of Vengeance's website:

* GM Performance 6.0L 6 Bolt Mains, 4.005" Bore LS2 Block
* Eagle 4340 Forged Steel Crankshaft(4.000" Stroke)
* Manley Flat Top 4.000" Bore Forged Piston Set
* Akerly & Childs Ductile Moly Ring Pack
* Scat 4340 6.125" Forged H Beam Connecting Rods
* Clevite LS High Performance Main Bearings
* Clevite SBC High Performance Rod Bearings
* DuraBond LS Cam Bearings
* SDPC LS Complete Block Hardware Kit
* ARP LS Main Stud Kit
* GM Block Kit; Plugs/Dowels/Fittings
* Melling LS Series High Volume Oil Pump
* Vengeance Vindicator Camshaft - 240/244 .605/.596 112 LSA
* Katech C5R Single Roller Timing Chain/gear set
* Comp Cams Hi-Performance Drop In Lifters
* GM Lifter Trays(set of four)
* GM Cam Retainer Bolts(x3)
* GM LS Cam Retainer Plate
* ARP Head Studs
* Yella Terra Ultra Lite 1.7 Non Adjustable Shaft Mount Roller Rockers
* GM MLS Head Gaskets
* Comp Cams or TEA Hardened Pushrods
* TrickFlow 225 CNC Cylinder Heads, Fully Assembled, Includes .675" Lift Dual Valve Springs


This can be yours for the low, low price of $5,000

You can check on Vengeance's website. It's $9,649.99 new.

I'm not interested in any trades. Cash only. I'm putting this up for sale as local pick-up only. Thanks.

30th t/a

iTrader: (51)

Wow thats a damn good deal for someone!

CRL 01 SS

iTrader: (4)

I know! I was thinking about putting this motor in my Corvette, but decided to just leave it stock. Now I have no use for it and nowhere to store it.

CRL 01 SS

iTrader: (4)

TTT...this needs to go! I will accept a reasonable offer.

blk00ss

iTrader: (66)

Bump for a great seller! Stand up guy!

P. S.

If you need somewhere to "store" it, I have plenty of shop space. May even buy me another f body to put it in until you get it sold lmao

WS6 GreeN

If the sale of my kidney goes through.... What compression did you say it was?

usmcpi

iTrader: (2)

Pics? Aluminum or iron block? Compression? Set up for N/A, N20, boost? What intake?

CRL 01 SS

iTrader: (4)

The motor is at my friends shop, but I will try to get some pics posted up. It has an aluminum block, 11:1 compression, and Ron at Vengeance said a 250 shot can be sprayed on it safely. It does not come with an intake.

dr_whigham

iTrader: (49)

Sent you two PM's. I have the wife's "ok"

Oh yeah, and cash.

dr_whigham

iTrader: (49)

Just waiting on a PM or text from you, brother.

337-501-six five seven three

CRL 01 SS

iTrader: (4)

Sorry that I haven't been on here lately or replied to some of the PMs about the motor. There is a guy on here that's supposed to come pick it up Saturday. If anything changes then I will let y'all know.

CRL 01 SS

iTrader: (4)

Sold!