Corvette 9" housing IRS LG drag spindle rear cradle and more!
08-09-2012, 09:09 PM
#1
Corvette 9" housing IRS LG drag spindle rear cradle and more! Category: Drivetrain
Price: $1600
Part Fits: Corvette
Location (State): LA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
I'm splitting up the package. The upper and lower control arms have the Pfadt spherical bearings installed instead of the factory rubber bushings - $350 plus shipping. The LG spindles are sold. 9" rearend housing - $395 plus shipping.
Hey guys, i just bought a tricked out C5 and i'm going solid axle so these new but already mounted IRS parts are going up for sale. I would like to sell the entire cradle and all parts together but we will see if i need to seperate them. New fab 9" rear housing (i'm guessing it is from ESC but not positive) and the modified rear cradle that it is mounted on. The housing is empty, no center section. Billet aluminum LG drag spindles so you can fit 15" wheels. Used upper and lower control arms with new solid aluminum bushings, used factory alignment rods, used vented rotors and unknown shocks (not coilovers). One crossbar will have to be installed between your rear frame rails to complete the install in your corvette but it is very easily done. All parts are either new or in good used condition. I can ship at the buyers expense or you can pic it up. I did not modify the cradle myself so i can't answer any "how to" questions. I will try to answer any other questions though. This is a trick setup and should be one of the strongest IRS systems for the corvette. I will try to post pics but if i can't, i'll email them. $1600. The LG spindles alone cost nearly that. This is a steal for those looking to go fast!! Thanks guys, tracy
Last edited by TracyRR; 11-23-2012 at 08:33 AM.
08-09-2012, 11:08 PM
#2
Damn if i would have just waited. If u sale just the 9in section id love to buy it! Do u know if it uses special center section and what axles it uses?
Last edited by BOOSTEDcatfish; 08-10-2012 at 09:17 AM.
08-11-2012, 11:33 AM
#4
The way this was setup in my car, the rearend was mounted solidly to the chassis and used a conventional center section in the rear housing and the transmission was mounted up front. East Coast Supercharging (ECS) is who has the parts to complete the rearend but ECS adapt the transmission to the rear just like the factory did it. Someone correct me if i'm wrong about ECS. If i find out more info, i'll let you know. thanks
Last edited by TracyRR; 08-11-2012 at 12:02 PM.
08-11-2012, 05:29 PM
#6
Here is some more info on the car i just bought. Looks like the parts for the rear can be bought from DSS
http://forums.corvetteforum.com/drag...the-block.html
http://forums.corvetteforum.com/drag...the-block.html
