LQ4 6.0 for sale
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
LQ4 6.0 for sale
Category: Engine - Complete Motors
Price: $1300
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): NC
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
I do have a set of low mileage (35k miles) 317 aluminum heads I can toss in for free for the listed price.
Does not have PS pump, alternator, AC compressor, ECM, or starter.
Had about 150k miles on it (according to the writing on the side of the truck at the yard) and the truck ran when it was brought to the yard on 8-24, so it hasn't been down for long. I have not looked inside it or taken it apart, I'm going by what the yard told me and what was written on the truck it came out of. The truck was listed as "runs and drives" when it came to the yard. It was wrecked in the back, which is why it was at the junk yard.
I bought it to put in my 4x4 buggy while I built my 408 but changed my mind (again....)
$1300.
Its in Greenville, NC. I can help (read: not free but affordable) with delivery to Raleigh/Greensboro/Charlotte area as I constantly drive through there for work. Its not free delivery, but much cheaper than shipping or driving to pick it up yourself...
I can ship if you want, but crating costs and 100% shipping costs are on you. I'll drop it off to a terminal that is reasonably close.
PM me if interested. Or email: rob@ecors.com
Rob
Last edited by rockcity; 09-05-2012 at 06:28 PM.
#4
Teching In
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I don't really want to part with the manifolds. They can be had for $25 at a local U-pull-it yard. I do have spare driver's side if you are interested? I do have a set of manifolds on my 6.0 in my buggy that I plan to pull in lieu of custom headers, but haven't made up my mind yet. I may move on those in a month or so once I decide on a direction.
#5
Teching In
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for a few parts for my buggy rebuild and would trade the engine for any of the parts below. The closer to Greenville, NC the better. I don't mind used. I'm not in a major hurry, so I don't mind holding off and waiting for a decent deal on something.
102mm throttle body (drive by cable) for LS3 with MAF sensor
Howe 225 high volume steering pump
5 point harnesses, 2 sets, new, no cam-lock
Lokar throttle pedal and cable for a LQ4 Drive by cable
Wilwood 7/8" master cylinders (need 2)
408/416 rotating assembly
LQ4 ARP bolts
monster cam for LQ4
LS3 aftermarket fuel rails
Need to port and polish my LS3 heads
wiring and fuse panel options
all metal battery cut off switch
optima battery
fluid overflow/dump cans
PM me for more info
102mm throttle body (drive by cable) for LS3 with MAF sensor
Howe 225 high volume steering pump
5 point harnesses, 2 sets, new, no cam-lock
Lokar throttle pedal and cable for a LQ4 Drive by cable
Wilwood 7/8" master cylinders (need 2)
408/416 rotating assembly
LQ4 ARP bolts
monster cam for LQ4
LS3 aftermarket fuel rails
Need to port and polish my LS3 heads
wiring and fuse panel options
all metal battery cut off switch
optima battery
fluid overflow/dump cans
PM me for more info