FS: 73lb bosch injectors from FIC
10-24-2012, 05:53 PM
#1
11 Second Club
Thread Starter
iTrader: (16)
Join Date: Sep 2006
Location: The 405
Posts: 5,636
Likes: 0
Received 0 Likes
on
0 Posts
FS: 73lb bosch injectors from FIC Category: Engine - Intake/Fuel
Price: $450
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): OK
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
72 lb Bosch EV14 High Impedance
Genuine Bosch High Impedance Injectors
These injectors flow 73 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI. In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors represent the most current Bosch engineering and are used on many high power oem applications.
These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. Many tuners push these injectors to 6 bar and higher.
Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip for improved mixture preparation and atomization. This results in lower BSFC and better idle quality than many injectors with less flow.
Features:
Genuine, reliable Bosch Injectors
Excellent response characteristics
Robust Design
High Impedance
Low Impedance performance characteristics with High Impedance Compatibility
Specifications: Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (6 orifice) OR SINGLE TIP
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
FUEL INJECTOR CONNECTION - 73lb Bosch LS 2 Injector Drop-In Set of 8
Last edited by Phantom; 11-06-2012 at 01:20 PM.
