burgers

iTrader: (77)

Category: Accessories
Price: $179
Location (State): KS
Item Condition: Brand New
LS Engine?: Fits LS Engine

I built a engine for Gforce1320 and came up with a nice oil pan spacer to use a stock oil pan (gto, camaro and other low profile pans) with larger stroke cranks. We used this with the Gforce shop car and it has a 4.350 stroke Callie dragon slayer crank and a stock gto oil pan.

Here is from Chris's post in the Gen 4 section.

When building our 479 ci LSx tall deck engine for our GTO shop car we found the need to space the oil pan down to clear the big 4.350 stroke crank.
Since there are no fabricated oil pans available plus they are expensive, we decided to design a 3/8" oil pan spacer to allow the oil pan to sit lower so that the big stroke crank has room to spin.

Our LSx oil pan spacers will bolt up to any LS series block and are 3/8" thick.

You will need 1/2 longer oil pan bolts to use the spacer since you have to add an oil pan gasket for sealing. We are working on a hardware kit but it isnt available yet. The longer fasteners can be sourced at most hardware stores.

The Gforce LSx oil pan spacers are cnc machined from 6061 aluminum to ensure a perfect fit.


The spacers are $179. and are available on our web site.
http://www.shop.gforce1320.com/produ...&categoryId=45

Any questions pm me or Chris @ Gforce

burgers

iTrader: (77)

Still have a couple of these left!

burgers

iTrader: (77)

couple of theses left!