Superman09

iTrader: (65)

Category: Engine - Power Adders
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

SOLD

Up for sale is our first proto-type Top Mounted Twin Turbo Kit. This kit was built after many tweaks and changed to get it how we wanted. This kit will be available from us in Hot-Side form shortly, however this is our first kit that has been used for mock up and building, but never ran!

What is included:
-Stainless Steel Up-pipes with Truck Manifold and T4 Turbo Flanges. Pipes have bungs for your primary O2 sensors as well as 44-45mm v-banded waste gate flanges.
-Stainless Steel 3" downpipes. Each turbo runs a 2-piece, 3" downpipe out each side of the engine, through the K-member. The 2 pieces are connected with a v-band for easy installation/removal.
-(2) Turbonetics T4 6665, journal bearing .68 a/r turbos. Used for mock up only, never ran!
*OPTIONAL:
-27"x16.5"x3.5" Intercooler (24"x10"x3.5" Core size), 2-2.5" inlets and 1- 3" outlet.
-2-piece 3" Aluminum charge pipe from intercooler to throttle body with Twin 50mm BOV flanges

What is needed:
-Truck Manifolds
-A/C and front sway bar removal
-PA Racing Super Turbo K-member (BMR Turbo MAY fit but not guarantee'd)
-Stood up style radiator
-Cold side piping from turbos to cooler to fit your vehicle. You will want to do this depending on where you have your coolant lines ran.
-Relocated Alternator for Truck Manifolds
-Gaskets for hotside piping and hardware.

kalildude

iTrader: (19)

Is this a Huron speed kit or?

Superman09

iTrader: (65)

This is a one-off set-up. We will be making it into a "kit" in the near future.

kalildude

iTrader: (19)

Are these for fbodys? Can you send me a price for k member and cold side and twin turbo kit please and thanks

Superman09

iTrader: (65)

Yes, pictures above show it all installed on a Trans Am.
Pricing is also listed above in the first post for the intercooler and (2) cold side tubes.
To add a K-member, it would be $550 plus actual shipping cost.

6SIX6

iTrader: (10)

That is an amazing set up. I wish someone made a kit like that for a 3rd gen F-body. If I could make it fit I would for sure

wicked z28

iTrader: (9)

How much for just the hotside only?

Superman09

iTrader: (65)

No turbos, $1495

DisasterpeaceWS6

iTrader: (1)

That looks sexy as hell!

Superman09

iTrader: (65)

Thank you!

rorric

iTrader: (19)

Wow awesome set of twins if I wasn't having my son soon this would be mine.. bump for a sick set of twins .

Jefro6996

iTrader: (21)

I might have to come snag this kit up. I'll give you a call tomorrow Jon

C Murda

iTrader: (24)

will the actual "kit" that you guys make require front sway bar removal? if so im out unfortunately and back to my own "one off" kit

Superman09

iTrader: (65)

With all this piping going on and such under the hood, you would want that sway bar out of there just for the fact of being in your way when wrenching!

Treys06gto

iTrader: (8)

Yall should make a gto kit

Superman09

iTrader: (65)

we would love to if we could get a GTO in house to do a build on!

Kit is still for sale, someone pick it up!

goat_rider

Where are you located?

Superman09

iTrader: (65)

Shelby Township, MI

Superman09

iTrader: (65)

SOLD!

We will be doing this hotside as a kit however in the near future! PM me for details or keep your eyes pealed as I will certainly post it up!