dezlfrek

iTrader: (1)

Category: Drivetrain
Price: $200
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
LS Engine?: Non-LS Part

have some pro 4.29 gears I pulled out, very low miles, like less than 250. has the aluminum bearing cover with it, bearing, shims, and pinion nut all inctuded.

ctjohns

iTrader: (10)

What brand are they, any part number. Thanks

dezlfrek

iTrader: (1)

Richmond, I can send you pictures and ill look for part numbers for you

dezlfrek

iTrader: (1)

GF9-429-PRO 30-7 USA
that is on the ring gear, pinion only has 4.29 on it.. has bearings still on the pinion and nut with strange aluminum bearing cover also.

ctjohns

iTrader: (10)

Is that a big or small pinion? Any part number on the aluminum bearing cover? Sorry for all the questions, just want to make sure it will fit my stuff. Thanks

dezlfrek

iTrader: (1)

this is a big pinion and cover.. the gears I replaced these with are the small so I had to use a standard steel cover(same bolt pattern/interchangeable) in this strange aluminum cover's place and also why you are getting the bearings and such still on the pinion..

dezlfrek

iTrader: (1)

ttt bump

Randy WS6

iTrader: (69)

whats the spline count on the pinion ? and when you say large pinion bearing are you referring to the Daytona style pinion support

dezlfrek

iTrader: (1)

randy I would have to check but it believe it is a 9 and 39 count.. when I say its the big input its the higher splined input therefore a bigger diameter than a standard splined pinion, I am including the hub, the pinion bolt, the housing that is for the bigger pinion/bearings, pinion and ring gears..

dezlfrek

iTrader: (1)

randy I would have to check but it believe it is a 9 and 39 count.. when I say its the big input its the higher splined input therefore a bigger diameter than a standard splined pinion, I am including the yolkhub, the pinion bolt, the housing that is for the bigger pinion/bearings, pinion and ring gears..

dezlfrek

iTrader: (1)

randy I would have to check but it believe it is a 9 and 39 count.. when I say its the big input its the higher splined input therefore a bigger diameter than a standard splined pinion, I am including the yolk hub, the pinion bolt, the housing that is for the bigger pinion/bearings, pinion and ring gears..

Randy WS6

iTrader: (69)

So its a 35 spline pinion, not the stranded 28 spline pinion.

dezlfrek

iTrader: (1)

I am assuming you are correct, it is the 35 splined pinion, with a yolk..