tylrhmmtt04

Category: Drivetrain
Price: $1000
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): AL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine

This unit has been opened and installed, and removed right after the customer seen the vehicle and did not like having the programmable controller.

Our customer had this installed in his 72 K5 with the GMPP LS3 and GMPP 4L65E transmission. He did not like having the programmable options and opted for a different unit. So this one is for sale.

Part Number is 19212657

The GM Performance Parts Automatic Transmission Controller is a fully programmable transmission control system. Through a friendly PC Windows interface users are able to program transmission settings based on speed, engine load, engine speed and other parameters.

Product Specifications
Many special operating modes available including, manual mode for upshift/downshift button capability (paddle shifting and button shifting)
Compact Dimensions (5.9in x 4.15in x 1.75in)
Durable 63-pin weather sealed circular plastic connector built into case
All components specified for automotive conditions (125 degrees C with fuel, grease, and oil resistance).
9 PWM Driver outputs (Selectable 12v or ground output) (3amp)
3 Digital Driver outputs (Selectable 12v or ground output) (3amp)
4 frequency inputs (Engine Speed, TC Speed, Driveshaft speed, additional speed)
RS 232, CAN (2.0b) communications
16 Digital Inputs
6 Analog Inputs
1 frequency output (speedometer control)
Easy to use windows software interface
Data logging capability



Supported Transmissions

GM 4L60E
GM 4L65E
GM 4L70E
GM 4L80E
GM 4L85E

The transmission controller is designed to control a transmission. The transmission controller is not designed to function in a factory environment. It does not communicate with factory body control modules, engine control modules, modern dashboards, or vehicle communication networks. If you remove your factory transmission controller, your check engine light will turn on. Many factory functions, such as cruise control, may not work. The engine may run in a limp mode. The TCU is a stand-alone transmission controller. It can not tell (and doesnt care) whether the transmission is connected to a fuel-injected engine, a carbureted engine, or even an electric motor. If components on your vehicle are expecting to see a transmission and a transmission controller then you must first overcome those issues before purchasing a controller. A simple test is to unplug the transmission and factory transmission controller connectors and observe if there are any problems. If you would like to install the transmission controller in a factory environment, we strongly recommend you work with a dealer who has experience with installing the PCS transmission controller in that vehicle. PCS does not provide support for vehicle-specific issues that may arise when using the transmission controller.

Minimum Computer Requirements
Processor: Pentium 200MHz or above RAM: 24MB
OS: Windows 98, ME, NT, 2000, XP (32 and 64-bit), Vista (32 and 64-bit)
Hard Drive Space: 20MB for install, additional space for data logs & calibrations
Video: 800x600 or greater resolution
Peripherals: CD-ROM or internet connection required to obtain software
Comm Port: The TCU communicates using a 9-pin RS-232 serial communication port. Please note that most new laptops do not have this port. If your laptop does not have this port, you will need to purchase a USB to Serial Port Adapter. PCS sells an adapter (part num WRE-2200) but you can purchase one from a local electronics store. If you use a USB to serial adapter, you absolutely MUST run the CD that came with the adapter before you plug it into the computer. Failure to run the USB to serial adaptor CD before plugging in the adapter will prevent communication to the TCU.

This unit is great for retro fits, or custom street rod builds.
Price is $1,000.00 OBO

It is missing the communication disc, and the owner of the vehicle does have it. I will be getting it from him to add into this kit. As soon as I have it, I will post a picture for verification of it. Thanks!

tylrhmmtt04

Bump!

tylrhmmtt04

I have the Software disc now, will post a pic soon. Willing to work a deal for anyone who is interested...

tylrhmmtt04

Bump!!