Wilwood Brake conversion for 2nd gen Camaro Firebird Trans Am
05-27-2014, 12:29 PM
#1
Wilwood Brake conversion for 2nd gen Camaro Firebird Trans Am Category: Brakes
Price: $1000
Location (State): IN
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Non-LS Part
I am upgrading brakes to a Road Race focused setup and am selling off my current front brake setup, which includes the following:
- Wilwood Dynapro 6 Calipers (PN 120-10122 & 120-10123 - used, in great shape)
- Hardbrake Titanium heat shields for the above calipers
- Wilwood Forged Dynalite Calipers (2 x PN 120-6806 - both need rebuild kits @ $10 each)
- Wilwood Ultralight Rotors (2 x PN 160-0277 - new, unused)
- Wilwood Spec-37 HD Directional vane Rotors (PN 160-12289 & 160-12290 - used, resurfaced)
- Wilwood Polymatrix A pads for the Dynapro 6 Calipers (new, unused)
- hawk DTC70 Pads for the Dynapro 6 Calipers (used for 1.5 sessions, great shape)
- EBC Yellow Pads for the forged dynalite calipers (new, unused)
- Wilwood Hubs for tall spindle GM, 5x4.75 bolt pattern, 1/2x20 studs, with inner and outer bearings and seals (used, good shape)
- conversion brackets to make the whole deal work on a 2nd Gen F-body, and probably a bunch of other GM muscle cars. (used, good shape)
The items in blue cost me almost 900. The EBC pads were 95. Beyond that, the original 4 pot based kit was bought from Summit (Wilwood Kit 140-9053) a few years back for $775. I upgraded to the 6 pots last year after cooking the seals in the 4 pots. I'll sell everything for $800, and may consider separating. This would make an excellent brake upgrade for a drag or street car.
Last edited by 1981TA; 06-30-2014 at 06:36 PM.
