TU2 CAM, Comp Lifters, rockers, oilpump, burkhart susp.
#1
11 Second Club
Thread Starter
iTrader: (24)
Join Date: Nov 2003
Location: Chitown, IL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
TU2 CAM, Comp Lifters, rockers, oilpump, burkhart susp.
Category: Accessories
Price: $1
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
*NEW* Burkhart Drop sprindles - 1" drop with strange brakes. SOLD
-Here some info I learned about them. They require an aftermarket a-arm. You might be able to grind away some of the stock one to get them to fit, but IDK.
- They only fit skinnies, wider rims might work and would prob work with a spacer if you needed more.
- They do need burkhart's tie rod ends. they do not build them for a tapered tie rod. they offer a bump steer kit that corrects the tie rod angle for the drop in the spindle.
on a brighter note, I weighted them and they only weight like 23 or 24 pounds each. IIRC, the stock's are 54 pounds each.
---------------------
*NEW* Burthart manual rack adp. $100 FIRM
This lets you bolt up a manual rack to a k-member setup for a stock style rack.
--------------------
*NEW* TU2 Cam. Brand new, was installed, but the motor was never fired. Sold motor and buyer couldn't use the cam. $350 Shipped.
More aggressive idle quality, some loss in low speed driveability than our other Turbo Grinds. 1200+rwhp capable and stable to 7800+rpm. Several street cars have made mid-8 second passes with this grind. Duration @.050 is 236/236, lift is .578/.578, and is ground on a 112.5LSA.
--------------------------
ARP HEAD STUDS
ARP 234-4316 - 12 point nuts - Used.
For '98-'03 LS1 engines, (multi-length studs)
I'm missing a few of the washers, so you'll have to order those.
Can order from summit: http://www.summitracing.com/search/p...e/flat-washer/
SOLD
-----------------------
USED Comp Cams 7638-16 5/16 Magnum Pushrod 7.400" SOLD
----------------------
USED COMP CAMS replacment Ls1 hyd. lifters. $125
-----------------------
USED stock LS1 rockers with bolts. $50
-----------------------
USED LS6 oil pump. SOLD
All the used parts have a few hundred miles on it and some passes except for the stock rockers which have like 70 to 80k.
Last edited by 4bangermustang; 10-18-2014 at 05:34 PM.