LS1 Shortblock
11-18-2014, 03:42 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
LS1 Shortblock Category: Racing Parts
Price: $1300
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): MI
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine
11-19-2014, 07:44 AM
#4
TECH Apprentice
Join Date: Jan 2013
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I read this last night and filed it under the "too good to be true" heading. Checked back in this morning to see if anyone had corrected the price yet.
11-19-2014, 10:34 AM
#5
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
This is a block, pistons, crank & rods all assembled as shown in the pics. It is sitting on an engine stand in my garage collecting dust. It was in the car over a year ago when I decided to go in a different direction with the car. I just want it out of my garage because the car is virtually completed now, will be back in my garage soon and I need the room. The price is correct, $1300 and you pay the shipping. For all of you that read this, if you can setup the shipping to have it picked up at my house I will put it on a pallet and strap it down for you, just arrange for and pay the shipping.
11-19-2014, 10:44 AM
#6
This is a block, pistons, crank & rods all assembled as shown in the pics. It is sitting on an engine stand in my garage collecting dust. It was in the car over a year ago when I decided to go in a different direction with the car. I just want it out of my garage because the car is virtually completed now, will be back in my garage soon and I need the room. The price is correct, $1300 and you pay the shipping. For all of you that read this, if you can setup the shipping to have it picked up at my house I will put it on a pallet and strap it down for you, just arrange for and pay the shipping.
11-19-2014, 10:47 AM
#7
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Further, I don't know how may passes are on this engine. I bought it from another guy, put it in my car, fired it up and about 2 weeks later somebody talked me into spending a lot more money for a turbo engine.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
Trending Topics
11-19-2014, 10:49 AM
#8
Further, I don't know how may passes are on this engine. I bought it from another guy, put it in my car, fired it up and about 2 weeks later somebody talked me into spending a lot more money for a turbo engine.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
11-19-2014, 05:11 PM
#11
8 Second Club
iTrader: (76)
Join Date: Jun 2004
Location: Goshen NY
Posts: 2,902
Likes: 0
Received 0 Likes
on
0 Posts
Further, I don't know how may passes are on this engine. I bought it from another guy, put it in my car, fired it up and about 2 weeks later somebody talked me into spending a lot more money for a turbo engine.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
Here is want this is:
Darton sleeved LS1 block 4.155 bore machined for jesel and dry sump also has roller cam bearings
Callies racemaster crank 4.00
GRP Aluminum Rods 6.115
CP custom pistons -5cc dish
Probably worth a lot more, just want it gone.
whats your pay pal will pay you right now for it
11-20-2014, 09:25 AM
#15
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: Rochester, Michigan
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys, got way more in responses that I could even imagine. I'm a CPA who yesterday had an IRS agent sitting with me all day long auditing a client. I couldn't just stop to answer all the pm's. When I got home last night, somebody else offered more than asking price and it was sold to him.
