SLP Lid, 85mm MAF, SS Mandrel Bends, Ebony leather seats, Brakes, ABS, and more...
04-17-2015, 06:44 PM
#1
10 Second Club
Thread Starter
iTrader: (7)
Join Date: Mar 2005
Location: Buffalo
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
85mm MAF, SS Mandrel Bends, Ebony leather seats, Brakes, ABS, and more... Category: Accessories
Price: $1
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): NY
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
85mm Delphi MAF with pigtail - $70.00
(2) T56 crossmembers - $40.00 each
Ebony Leather Camaro seats (power driver side) (driver side has side bolster has a small hole warn, otherwise they are very clean) - $300.00
304SS 2.5" mandrel bends, 3' straight, 3.5" to T6 transition (does not include merge) - $65.00
304SS T6 merge (incomplete, needs finish weld and a surfacing, flange is tapped 1/2" 304SS, has mounting tabs) - $50.00
Mild steel 2.5" 180* bend and 3/8" divided MS T6 flange - $20.00
ABS block for non-traction control car - $35.00
ABS block for traction control car (not shown) - $35.00
Traction control module - $40.00
(2) E-brake handles - $35.00 each
(2) E-brake cables sets - $35.00 each
Stock LS1 sway bars - $25.00 each
Stock LS1 motor mounts with rubber - $25.00
Rear calipers from 2001 Camaro with 35,000 miles (includes newish pads and hoses) - $70.00
8" TH400 LS1 torque converter (was $900.00 from Comp Trans, need to find specs, only a few hundred easy miles) - $200.00
LS1 F-body k-member with break lines and motor mounts - $55.00 (WILL NOT SHIP)
Nitrous Outlet nitrous pressure gauge - $25.00
2 Cruise control modules (1 w/ TCS, 1 w/o TCS) - $40.00 each
26 spline Spicer slip yoke - $25.00
LS1 Camaro front bumper support - $30.00 (WILL NOT SHIP)
Air bag (for fun) - $30
Jaz Overflow tank (plugged the breather pinhole, can be drilled back out) - $15.00
(Breather sold)
Last edited by Turbo LS1 SS; 05-10-2016 at 09:04 AM.
Trending Topics
05-09-2015, 02:04 AM
#8
I have a 34,xxx mile cammed LS1 engine available for sale here: https://ls1tech.com/forums/parts-cla...l#post18733942
Below is a bunch of other stuff I have for sale. Some of the items I am flexible on (wasn't sure on pricing), some of the items I am not. Shoot me REALISTIC offers, and i will see if it falls in line with what it's worth. Items without pictures are still in the car. Shipping and Paypal fees are at buyers' expense. I'm located near Buffalo, NY.
LS6 Intake with Potz Ported throttle body - $475.00 -ONLY FOR SALE AFTER ENGINE SELLS!!!!! (I won't respond to requests until engine is gone)
LS1 Fuel rails and injectors (may be 36#, I need to check) - $50.00 PENDING
LS1 F-body Waterpump (34,000 miles) (does not include bolts or thermostat) - $100.00
Hooker LS1 F-body headers (EGR provisions cut off and welded shut, and the headers were coated with high-temp grille paint) - $125.00 (WILL NOT SHIP)
Mufflex 4" Single outlet exhaust system with Spintech muffler and Y-pipe (also was coated with high-temp black grille paint) - $425.00 (WILL NOT SHIP)
SLP air lid, air lid base with clean K&N filter and stainless hardware (does not include IAT sensor) - $200.00
85mm Delphi MAF with pigtail - $85.00
F-body AC system (34,000 miles) (condenser, compressor/bracket, dryer, belt, hoses) - $175.00
(2) T56 crossmembers - $50.00 each
Ebony Leather Camaro seats (power driver side) (driver side has side bolster has a small hole warn, otherwise they are clean) - $300.00 (WILL NOT SHIP)
304SS 2.5" mandrel bends, 3' straight, 3.5" to T6 transition (does not include merge) - $100.00
304SS T6 merge (incomplete, needs finish weld and a surfacing, flange is tapped 1/2" 304SS, has mounting tabs) - $100.00
Mild steel 2.5" 180* bend and 3/8" divided MS T6 flange - $25.00
ABS block for non-traction control car - $50.00
Traction control module - $40.00
(2) E-brake handles - $40.00 each
(2) E-brake cables sets - $35.00 each
Stock LS1 sway bars - $25.00 each
Stock LS1 motor mounts with rubber - $25.00
SLP SS grille - $125.00
Rear calipers from 2001 Camaro with 35,000 miles (includes newish pads and hoses) - $85.00
8" TH400 LS1 torque converter (was $900.00 from Comp Trans, need to find specs, only a few hundred easy miles) - $400.00
4" Steel HD driveshaft for long shaft TH400 to 9-inch rear in an F-body - $100.00
LS1 F-body k-member with break lines and motor mounts - $85.00 (WILL NOT SHIP)
2000 F-body Decarbon shocks and stock springs (under 30,000 miles) - $85.00
Edelbrock 1411 Performer Series 750CFM Carburator (Very light use, it looks like new) - $200.00
Nitrous Outlet nitrous pressure gauge - $25.00
2 Cruise control modules (1 w/ TCS, 1 w/o TCS) - $50.00 each
26 spline Spicer slip yoke - $25.00
LS1 Camaro front bumper support - $40.00 (WILL NOT SHIP)
SLP Fan switch - $40
Air bag (for fun) - $30
7 MSD & 1 Taylor plug wires - $25.00
Jaz Overflow tank (plugged the breather pinhole, can be drilled back out) - $15.00
Jaz Oil Breather - $30.00
Below is a bunch of other stuff I have for sale. Some of the items I am flexible on (wasn't sure on pricing), some of the items I am not. Shoot me REALISTIC offers, and i will see if it falls in line with what it's worth. Items without pictures are still in the car. Shipping and Paypal fees are at buyers' expense. I'm located near Buffalo, NY.
LS6 Intake with Potz Ported throttle body - $475.00 -ONLY FOR SALE AFTER ENGINE SELLS!!!!! (I won't respond to requests until engine is gone)
LS1 Fuel rails and injectors (may be 36#, I need to check) - $50.00 PENDING
LS1 F-body Waterpump (34,000 miles) (does not include bolts or thermostat) - $100.00
Hooker LS1 F-body headers (EGR provisions cut off and welded shut, and the headers were coated with high-temp grille paint) - $125.00 (WILL NOT SHIP)
Mufflex 4" Single outlet exhaust system with Spintech muffler and Y-pipe (also was coated with high-temp black grille paint) - $425.00 (WILL NOT SHIP)
SLP air lid, air lid base with clean K&N filter and stainless hardware (does not include IAT sensor) - $200.00
85mm Delphi MAF with pigtail - $85.00
F-body AC system (34,000 miles) (condenser, compressor/bracket, dryer, belt, hoses) - $175.00
(2) T56 crossmembers - $50.00 each
Ebony Leather Camaro seats (power driver side) (driver side has side bolster has a small hole warn, otherwise they are clean) - $300.00 (WILL NOT SHIP)
304SS 2.5" mandrel bends, 3' straight, 3.5" to T6 transition (does not include merge) - $100.00
304SS T6 merge (incomplete, needs finish weld and a surfacing, flange is tapped 1/2" 304SS, has mounting tabs) - $100.00
Mild steel 2.5" 180* bend and 3/8" divided MS T6 flange - $25.00
ABS block for non-traction control car - $50.00
Traction control module - $40.00
(2) E-brake handles - $40.00 each
(2) E-brake cables sets - $35.00 each
Stock LS1 sway bars - $25.00 each
Stock LS1 motor mounts with rubber - $25.00
SLP SS grille - $125.00
Rear calipers from 2001 Camaro with 35,000 miles (includes newish pads and hoses) - $85.00
8" TH400 LS1 torque converter (was $900.00 from Comp Trans, need to find specs, only a few hundred easy miles) - $400.00
4" Steel HD driveshaft for long shaft TH400 to 9-inch rear in an F-body - $100.00
LS1 F-body k-member with break lines and motor mounts - $85.00 (WILL NOT SHIP)
2000 F-body Decarbon shocks and stock springs (under 30,000 miles) - $85.00
Edelbrock 1411 Performer Series 750CFM Carburator (Very light use, it looks like new) - $200.00
Nitrous Outlet nitrous pressure gauge - $25.00
2 Cruise control modules (1 w/ TCS, 1 w/o TCS) - $50.00 each
26 spline Spicer slip yoke - $25.00
LS1 Camaro front bumper support - $40.00 (WILL NOT SHIP)
SLP Fan switch - $40
Air bag (for fun) - $30
7 MSD & 1 Taylor plug wires - $25.00
Jaz Overflow tank (plugged the breather pinhole, can be drilled back out) - $15.00
Jaz Oil Breather - $30.00
05-18-2015, 08:40 PM
#12
10 Second Club
Thread Starter
iTrader: (7)
Join Date: Mar 2005
Location: Buffalo
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the long delay everyone, it's my busy trade show season at work plus I had a vacation so the car stuff had to take a back seat. But I'm eager to get this stuff sold, so send me money and I'll send you parts!!!! FYI, if i don't have it posted in this thread, I DON'T HAVE IT FOR SALE!!!!! 
will do sir
I do, $140.00 shipped to you
I believe we spoke and I responded to late, but it is still for sale.
Still for sale. It was made by a local driveshaft company, Fleet Pride. No official power rating, but it's 4" steel and was made to handle over 1,000HP, which it did. I don't know it's size in relation to stock, but i included measurements and it is for a long tail shaft TH400 to a 9inch rear.
It is, $140.00 shipped to you.
These are pending sale, but i will get back to you in case that falls through.
I would, $50.00 shipped.
It is still available, PM sent.
will do sir
I do, $140.00 shipped to you
I believe we spoke and I responded to late, but it is still for sale.
It is, $140.00 shipped to you.
These are pending sale, but i will get back to you in case that falls through.
I would, $50.00 shipped.
It is still available, PM sent.
