Built 4l60e fbody swap
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Mar 2012
Location: College Station, Texas
Posts: 311
Likes: 0
Received 0 Likes
on
0 Posts
Built 4l60e fbody swap
I have a freshly gone through built 4l60e. I did a t56 swap in my fbody and have the whole swap available.
Trans: 4l60e- 4L65E Hi Enery Master Rebuild kit Kolene steels
High energy 3-4 Clutches
Dual metal cage 29 element sprag
Wide Carbon Band
New OEM GM Reverse Input Drum
Sonax SmartShell Sunshell
Corvette Servo
New low roller sprag
OEM AC Delco 1-2 & 2-3 Shift Solenoids
New Wiring Harness
New TCC Solenoid
New Pressure Manifold Switch
Pump Rebuild kit with New Rotor, Veins, Rings
New Bushing Kit
All Metal Pistons
Full Transgo Hd2-c Shift Kit
Deep Pan with Plug
Will support 600 hp.
2800 North Texas Converter with flex plate (1,500 miles) arp converter bolts
Or used stock converter
Has the factory torque arm mount and exhaust hanger.
One piece steel driveshaft.
Both dust covers (only one in picture)
B&m trans cooler and factory lines for radiator cooler
A4 fbody shifter with shift cable. Has the plug to rewire dash harness.
A4 crossmember (from a v6, but with included v6 mount will work on any v8 fbody)
A4 pedals with sensors
Upper console plate for ebony trans am, great condition. With shift **** (slight wear)
All for $2,200, shipping at your expense. Free to offers and willing to split.
College station texas, 77845. I am in the Houston area and in between al week if you want to strand a pickup.
I have more pictures that I can send, or I'll bump this thread with them
Trans: 4l60e- 4L65E Hi Enery Master Rebuild kit Kolene steels
High energy 3-4 Clutches
Dual metal cage 29 element sprag
Wide Carbon Band
New OEM GM Reverse Input Drum
Sonax SmartShell Sunshell
Corvette Servo
New low roller sprag
OEM AC Delco 1-2 & 2-3 Shift Solenoids
New Wiring Harness
New TCC Solenoid
New Pressure Manifold Switch
Pump Rebuild kit with New Rotor, Veins, Rings
New Bushing Kit
All Metal Pistons
Full Transgo Hd2-c Shift Kit
Deep Pan with Plug
Will support 600 hp.
2800 North Texas Converter with flex plate (1,500 miles) arp converter bolts
Or used stock converter
Has the factory torque arm mount and exhaust hanger.
One piece steel driveshaft.
Both dust covers (only one in picture)
B&m trans cooler and factory lines for radiator cooler
A4 fbody shifter with shift cable. Has the plug to rewire dash harness.
A4 crossmember (from a v6, but with included v6 mount will work on any v8 fbody)
A4 pedals with sensors
Upper console plate for ebony trans am, great condition. With shift **** (slight wear)
All for $2,200, shipping at your expense. Free to offers and willing to split.
College station texas, 77845. I am in the Houston area and in between al week if you want to strand a pickup.
I have more pictures that I can send, or I'll bump this thread with them