FULL Madman rear suspension, Strange 12 bolt with custom anti-roll bar, PG driveshaft
01-05-2016, 03:18 PM
#1
FULL Madman rear suspension, Strange 12 bolt with custom anti-roll bar, PG driveshaft Category: Accessories
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): NC
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
The Strange 12 bolt has a custom anti-roll bar welded to it that cannot be removed. The Strange 12 bolt was set-up to use Strange aftermarket disc brakes.
I would prefer to sell all of this at one time to someone who wants the entire package. Full rear suspension and a nice Strange 12 bolt.
The 12 bolt includes the following:
Custom anti-roll bar
Strange 12 bolt housing narrowed 3" on each side
4.11 gear
35 spline axles
Spool
1/2" studs
1350 Strange chromoly pinion yoke
chrome differential cover
I also have:
Madman Extreme Duty short TA
Madman LCA's
Weld in TA cross member (worked with my TH400 and Glide and with dual 12" extensions off each collector. Should have no interference with dual exhaust either or y-pipes.)
Edelbrock Panhard bar (shown in pictures above with rear end, still currently attached to rear end)
Custom 3.5" Chromoly steel PST drive shaft with 1350 u-joints for glide and 12 bolt (less than 40 passes, no street driving)
Pricing:
12 bolt with anti-roll = 1800.00 OBO
Madman TA = 500.00 (715.00 brand new)
Madman LCA's = 175.00 (235.00 brand new)
Edelbrock Panhard bar = 150.00 (200.00 brand new)
PST drive shaft = 250.00 (400.00 brand new)
I will sell every single thing here as a package for 2500.00 OBO.
LOCAL PICK UP ONLY!!! My zip code is 27301 if someone wants to drive to me to pick it up, I will meet them one hour one way from my address for free.
I NEED THIS GONE!!!!!!!!!!!!!!!!!
Trending Topics
03-11-2016, 04:09 PM
#11
PM sent [QUOTE=Martin Smallwood;19181166]PRICE REDUCTION TO 2200 dollars sans drive shaft!!!
You will NEVER get this kind of deal anywhere else.
Someone do themselves and me a favor and buy it
03-12-2016, 02:16 PM
#13
Teching In
Join Date: Jan 2013
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Do you still have the lower control arms?
I am selling the Strange 12 bolt and old rear suspension I had in my 2002 Camaro race car.
The Strange 12 bolt has a custom anti-roll bar welded to it that cannot be removed. The Strange 12 bolt was set-up to use Strange aftermarket disc brakes.
I would prefer to sell all of this at one time to someone who wants the entire package. Full rear suspension and a nice Strange 12 bolt.
The 12 bolt includes the following:
Custom anti-roll bar
Strange 12 bolt housing narrowed 3" on each side
4.11 gear
35 spline axles
Spool
1/2" studs
1350 Strange chromoly pinion yoke
chrome differential cover
I also have:
Madman Extreme Duty short TA
Madman LCA's
Weld in TA cross member (worked with my TH400 and Glide and with dual 12" extensions off each collector. Should have no interference with dual exhaust either or y-pipes.)
Edelbrock Panhard bar (shown in pictures above with rear end, still currently attached to rear end)
Custom 3.5" Chromoly steel PST drive shaft with 1350 u-joints for glide and 12 bolt (less than 40 passes, no street driving)
Pricing:
12 bolt with anti-roll = 1800.00 OBO
Madman TA = 500.00 (715.00 brand new)
Madman LCA's = 175.00 (235.00 brand new)
Edelbrock Panhard bar = 150.00 (200.00 brand new)
PST drive shaft = 250.00 (400.00 brand new)
I will sell every single thing here as a package for 2500.00 OBO.
LOCAL PICK UP ONLY!!! My zip code is 27301 if someone wants to drive to me to pick it up, I will meet them one hour one way from my address for free.
I NEED THIS GONE!!!!!!!!!!!!!!!!!
The Strange 12 bolt has a custom anti-roll bar welded to it that cannot be removed. The Strange 12 bolt was set-up to use Strange aftermarket disc brakes.
I would prefer to sell all of this at one time to someone who wants the entire package. Full rear suspension and a nice Strange 12 bolt.
The 12 bolt includes the following:
Custom anti-roll bar
Strange 12 bolt housing narrowed 3" on each side
4.11 gear
35 spline axles
Spool
1/2" studs
1350 Strange chromoly pinion yoke
chrome differential cover
I also have:
Madman Extreme Duty short TA
Madman LCA's
Weld in TA cross member (worked with my TH400 and Glide and with dual 12" extensions off each collector. Should have no interference with dual exhaust either or y-pipes.)
Edelbrock Panhard bar (shown in pictures above with rear end, still currently attached to rear end)
Custom 3.5" Chromoly steel PST drive shaft with 1350 u-joints for glide and 12 bolt (less than 40 passes, no street driving)
Pricing:
12 bolt with anti-roll = 1800.00 OBO
Madman TA = 500.00 (715.00 brand new)
Madman LCA's = 175.00 (235.00 brand new)
Edelbrock Panhard bar = 150.00 (200.00 brand new)
PST drive shaft = 250.00 (400.00 brand new)
I will sell every single thing here as a package for 2500.00 OBO.
LOCAL PICK UP ONLY!!! My zip code is 27301 if someone wants to drive to me to pick it up, I will meet them one hour one way from my address for free.
I NEED THIS GONE!!!!!!!!!!!!!!!!!
03-15-2016, 12:37 AM
#14
The 12 bolt has a lot of passes on it. Not sure how many, but I would say at least 150 passes. It has only had about 25-30 passes on it at 1000rwhp or more. The rest of the passes were made at cam only LS1 power levels and 250 shot cam only LS1 power levels.