SOLD - Fresh LME Ported 243 Heads
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
SOLD - Fresh LME Ported 243 Heads
Category: Engine - Power Adders
Price: $1550
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, Front wheel drive vehicles
Location (State): TX
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Cost me over $1800. Asking $1550 shipped. Heads still available! Sold to Camaro350Z28.
SOLD - I also have a set of 7.375" 5/16" chromoly pushrods. Brand new. Paid $95, Asking $85 shipped. Sold to Sebtarta.
More pics available upon request.
Last edited by eidolonic; 02-25-2016 at 09:36 AM.
#2
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Combustion Chambers are 65cc
Intake Runners are 227cc
Flows are 320cfm @ .6" on the intake and 220cfm @ .6" on exhaust. Bryan confirmed that for me this morning.
Valves are stock but have been reseated.
These same heads have put down 440 hp on an all motor LS2 on pump gas.
Intake Runners are 227cc
Flows are 320cfm @ .6" on the intake and 220cfm @ .6" on exhaust. Bryan confirmed that for me this morning.
Valves are stock but have been reseated.
These same heads have put down 440 hp on an all motor LS2 on pump gas.
Last edited by eidolonic; 02-09-2016 at 11:35 AM. Reason: corrected numbers
Trending Topics
#11
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Yes these will fit any ls1, ls6, ls2 or anything else with cathedral style intake ports. In looking at afrs page it appears that mine flow more like the 230cc heads and will outflow the 210s by around 20cfm through all lift heights.
LME is that good.
LME is that good.
#17
TECH Fanatic
iTrader: (2)
I have a set of Late Model Engines (LME) CNC Ported Heads. These have been torqued up but never ran. Stock valves have been reseated and sealing is absolutely perfect. Combustion chambers are 65cc. Heads have been decked down .024". Has a set of Brian Tooley .660" Lift Platinum Springs with Titanium retainers (dual springs)... (these were $300).
Cost me over $1800. Asking $1550 shipped.
I also have a set of 7.375" 5/16" chromoly pushrods. Brand new. Paid $95, Asking $85 shipped. These are $50 if you buy the heads.
More pics available upon request.
Cost me over $1800. Asking $1550 shipped.
I also have a set of 7.375" 5/16" chromoly pushrods. Brand new. Paid $95, Asking $85 shipped. These are $50 if you buy the heads.
More pics available upon request.