ablakez28

iTrader: (9)

Category: Engine - Power Adders
Price: $4500
Location (State): NY
Item Condition: Brand New
LS Engine?: Fits LS Engine

Built this kit a few years ago for my Nova II. Has run 8s quite easily 150+ on my 408. Went 9.0 on a s480 with a stock bottom end 6.0 as well.

On the dyno it made 888rwhp/1004rwtq when it was a 6.0 and a s480


Included:

Hot Side
Truck manifold based hot side v-banded -
2.5" 304 stainless tig welded/purged
divided T6 configuration for S400 series turbos
2x Tial MVS gates
Ceramic coated by nitroplate - manifolds coated and wrapped. Excellent heat retention.

Cold side:

3" alum IC piping
50mm BOV
CX Racing 4" core IC
Threaded IAT bung

Exhaust:

This kit has a few options and I can include any/all
5" Aluminum downpipe right out the fender
5" to 4" Ceramic coated (silver/polished from nitroplate) downpipe that comes past the frame under the car. PLEASE KNOW THIS WILL REQUIRE YOU TO BANG THE FLOOR.
This has a v-band where you can either
1. transition to aluminum that comes out under the pass door
2. Run out the back(4" to dual 3")

Turbo:

S484 from LJMS on a 1.58 AR exhaust housing.
Billet wheel, race cover. Went 8.8 at 19psi

$4500 for EVERYTHING not including shipping. Willing to keep the turbo and wastegates if someone wants to work a deal on just hot/cold parts.

ablakez28

iTrader: (9)

I am located in Buffalo NY

shawnzy89

iTrader: (8)

Bump for a great seller and a quality kit proven to make big power!

ablakez28

iTrader: (9)

Lets get this bad boy on another Nova or possible other swap chassis!

Suncc49

You really should post this on nova monsters on facebook and steves nova site forums too. Lots of guys w Novas there.

ablakez28

iTrader: (9)

Im not on FB and steves nova site said i need 25 posts

Want to cross post it?

Ratical

iTrader: (82)

You just upgraded to that turbo too so it must have almost no passes on it. I was hoping to see what it was going to do this year on kill, but the new combo should be crazy!

Bump it up for a great seller and Monster fabricator!

helicoil

iTrader: (104)

Build thread or more pics?

shawnzy89

iTrader: (8)

https://ls1tech.com/forums/forced-in...480-build.html

ablakez28

iTrader: (9)

Thanks!

Yes this turbo has about 1k miles and 7-10 passes on it.

ablakez28

iTrader: (9)

Here you can see the coatings a little better. Manifolds are wrapped as well now.

ablakez28

iTrader: (9)

Bump! Make offers! Especially if I can hang onto the gates and turbo. Lets get this making steam on another setup.

Turbo LS1 SS

iTrader: (7)

Get some!!! This setup hauls ***!

ablakez28

iTrader: (9)

This kit ran 8s on still low boost and a bad 60ft!!!!

Got a few PMS and even an offer last night. Let's get this thing on a car some someone can go run bottom 8s this year.

ablakez28

iTrader: (9)

Lets get this sold. First solid offer takes it. I pulled it off last weekend.

Also for the right price willing to include the turbo cover, oil feed, and oil drain lines!

Big Daddy 600

iTrader: (1)

What front subframe do you have on your car? I'm interested in the kit I have a 66 Chevy II

ablakez28

iTrader: (9)

TCI front subframe. This should fit on most of the front frames I have looked at but am happy to take any measurements you would need.

ablakez28

iTrader: (9)

Let's get some offers! I have the kit off and boxed ready to ship.

ablakez28

iTrader: (9)

First reasonable offer takes this home.

willieboy240

Hi.
What's a reasonable offer to you ? Just wondering what you had in mind.
Thanks Will