FS: LS7 Edelbrock E-Force supercharger
#1
Teching In
Thread Starter
Join Date: May 2006
Location: Raeford, NC
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
FS: LS7 Edelbrock E-Force supercharger
Category: Accessories
Price: $4
Location (State): AL
Item Condition: Brand New
LS Engine?: Fits LS Engine
I installed it at 37K, and removed it at 54K, so it has 17K miles on it.
I tried to include detailed pictures of all parts in conjunction with the installation manual to identify everything included.
I ground down one of the fuel rails for a better fit.
One of the injector adapters has a broken clip.
The PCV hose could be replaced, as it is a PITA to remove. It seals fine, but doesn't look pretty.
Since I already had installed a 2010+ oil cooler, that plus the installation hoses are not included. This is not a problem of you already have a 2010+ Z06 or the Z07 package.
This is what is not included, as I sold these since I already had them installed. The clamps and connectors can be bought from Edelbrock, and the oil cooler and hoses can be bought cheaper through forum vendors.
What you will need is the oil cooler, if applicable, as above with hoses, a crank pining dowel, balancer bolt (if pinning the crank) and some miscellaneous installation hardware identified in the pictures (most of these bolts are not reusable after uninstallation)
Additionally, I will include a Halltech Beehive fitted for the E-Force,
Jannetty Racing fuel line kit
Barrett Design 657HP badges
Shipping this would not be cost effective, but I can meet within a reasonable distance between Nashville and Lexington.
Asking 4K obo..