WTB: Rear mount turbo piping or sts piping for F-body
03-07-2009, 10:04 AM
#6
TECH Apprentice
iTrader: (5)
Join Date: Oct 2003
Location: Glendale,AZ
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
Hey man I'm planning on de-modding soon, I pm'ed you a while back wanting to sell the whole kit but am know contemplating selling part of my kit w/o major components. READ no Turbo, no BOV no WASTEGATE. THE HOT SIDE: I have a wrapped SLP y-pipe to a dynomax I pipe with custom dynomax ball flanges, into a custom Rear mount turbo inlet pipe, that will have a tial 44 mm flange and t3 turbo flange that can easily be replaced with a weld in t4 flange (ill include the flange!) Both side outlet pipes with 4" stainless tips and a Spiral flow muffler on the down pipe side. THE COLD SIDE: 2.5" mandrel bent aluminized and painted steel pipe. Under axle from turbo, pipe is much higher than O.E. STS to in front of condencer intercooler (included) 12x18x3 and pipe up to TB throught the coolant resovoir area with 50mm tial flange all silicone couplers and 4 layer silicone elbows 2x 2.5" ones and the 1 TB-MAF 4"-3.5" these were expensive
All Parts that have a RED DOT on them
I want to sell this all together, I'm not willing to sperate any further. except minus intercooler (-$200) There is well over $1800 worth of parts and machine shop labor for these parts I'd like to get $1k ,$800 w/o intercooler, for the above parts. Thanks Pete
Ill pay shipping in the lower us for the $1k deal to a buisness address or half the shipping to a residential one
All Parts that have a RED DOT on them
I want to sell this all together, I'm not willing to sperate any further. except minus intercooler (-$200) There is well over $1800 worth of parts and machine shop labor for these parts I'd like to get $1k ,$800 w/o intercooler, for the above parts. Thanks Pete
Ill pay shipping in the lower us for the $1k deal to a buisness address or half the shipping to a residential one
