WTB: Catch can, ati damper, 8 rib crank pulley etc
03-01-2009, 11:08 AM
#2
I have the complete 3.5 inch ATI intercooler setup for an ATI D1SC.
Hoses, clamps, intercoolers, with Aluminum plenum and the original by-pass valve.
I also have the piping from the EPP fmic kit. I have just the piping without the clamps, silicone pipe connectors, or throttle 3-4 throttle body hose I replaced the EPP piping with custom aluminum piping.
By ATI damper - I assume you mean the damper for the ATI 8 rib that get pinned to the crank.
I also have a smaller damper if your not referring to the ATI SC damper.
Hoses, clamps, intercoolers, with Aluminum plenum and the original by-pass valve.
I also have the piping from the EPP fmic kit. I have just the piping without the clamps, silicone pipe connectors, or throttle 3-4 throttle body hose I replaced the EPP piping with custom aluminum piping.
By ATI damper - I assume you mean the damper for the ATI 8 rib that get pinned to the crank.
I also have a smaller damper if your not referring to the ATI SC damper.
