WTB: 900hp t56 setup!tick,viper spec trans,etc.
02-20-2010, 07:12 PM
#1
TECH Resident
Thread Starter
iTrader: (52)
Join Date: Jan 2004
Location: DFW
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
WTB: 900hp t56 setup!tick,viper spec trans,etc. I'm going to be purchasing a complete t56 setup soon for my 98 and figured I'd make a pass on the lightly used market before i dropped the dough on new parts.Key words here are LIGHTLY USED! I don't wont some worn out junk.
looking for the following
tick adj. master
2001-02 slave
remote bleeder
Twin spec clutch pt trim or RPS dual carbon/carbon
Viper spec t56 with 30 spline output shaft and all the good internals(built by a well known company)
Short shifter
cross member
Probably a long shot but figured I'd try.Not looking for any other clutch,master or slave other than what is listed.
Thanks,
Bryan
BTW i have the following parts i can trade if interested
1.85mm zo6 maff(less than 100 miles)
2.complete fuel system minus rails and injectors.Includes plastic 99-02 tank with sending unit with walbro 255 intank,-8 feed with a y to two -6 going to the back of motor,aeromotive reg.with -6 lines coming from the front of the motor going to reg.,-6 return to the tank,and filter.
3.Detroit locker for 9 in
looking for the following
tick adj. master
2001-02 slave
remote bleeder
Twin spec clutch pt trim or RPS dual carbon/carbon
Viper spec t56 with 30 spline output shaft and all the good internals(built by a well known company)
Short shifter
cross member
Probably a long shot but figured I'd try.Not looking for any other clutch,master or slave other than what is listed.
Thanks,
Bryan
BTW i have the following parts i can trade if interested
1.85mm zo6 maff(less than 100 miles)
2.complete fuel system minus rails and injectors.Includes plastic 99-02 tank with sending unit with walbro 255 intank,-8 feed with a y to two -6 going to the back of motor,aeromotive reg.with -6 lines coming from the front of the motor going to reg.,-6 return to the tank,and filter.
3.Detroit locker for 9 in
Last edited by sr71bbjr; 02-20-2010 at 07:18 PM.
