99T/AVert

iTrader: (5)

Hello guys, I am looking for a clean used ls3 or l92 bare block with covers. Thanks guys!

007gmc

iTrader: (4)

i have a l92 bored .015 over 4.080" bore, main caps. Its ready for a 418 or 427 rotating assembly. let me know if your interested.

Hotrod406

iTrader: (6)

Clean, but not bare.

https://ls1tech.com/forums/parts-cla...ort-block.html

99T/AVert

iTrader: (5)

PM me your bottom dollar offer.

Thanks!

99T/AVert

iTrader: (5)

Thanks for the post man, but I don't need all that, I just need the block with covers. I am building a stroker so I have my crank, rods and pistons. Thanks again!

99T/AVert

iTrader: (5)

I have found 2 L92 with covers on CL for $500 and one even has 30K on it. Why can't I found that here

Hotrod406

iTrader: (6)

Stock L92 and LS3 blocks are 4.065 bore. You're going to need an LS2 block if you want to use those pistons.

99T/AVert

iTrader: (5)

Do'h!

lol, talk about a brain fart... I was thining of the LQ4 when I posted the cylented bore size, lol...

Well there are 2 L92s on CL for $500 and one with 30K so I might be going with one of them, but I rather buy for the community when possible.

Thanks for the quick skooling BTW, lol

Hotrod406

iTrader: (6)

I have an LQ4 short with about 125k miles on it if you want that. I only took it out to install my L92 short in its place.

99T/AVert

iTrader: (5)

lol, no I have a LQX now, but was thinking of bumping up to a L92 for my stroker build. Thanks anyhow.