WTB-O2 extensions and etc
#1
WTB-O2 extensions and etc
Needs:
O2 extensions, the flat orange kind. I have some new blue-gasket square kind I can trade. Will sell them for $25 shipped.
In tank walbro 255, ideally a gss340 with the kit.
Every post after this one is out of date, so ignore them.
Thanks again.
I have a harness from an Escalade/ LQ9, stock pushrods, stock cam, a stock DBC throttle body, some stock truck manifolds to trade if interested.
O2 extensions, the flat orange kind. I have some new blue-gasket square kind I can trade. Will sell them for $25 shipped.
In tank walbro 255, ideally a gss340 with the kit.
Every post after this one is out of date, so ignore them.
Thanks again.
I have a harness from an Escalade/ LQ9, stock pushrods, stock cam, a stock DBC throttle body, some stock truck manifolds to trade if interested.
Last edited by chuckd71; 11-10-2010 at 10:12 AM.
#6
Some last-minute needs. Pushrods, intake, sanden, Escalade intake cover
Need 7.425 hardened pushrods for the cam I just bought. the last two sets I've seen actually sell here went for $75 and $80, each with (supposedly at least) 1000 on them, so I'd do $85 to Nashville for some lightly used ones.
Picked up the side pieces locally for $25 but I still need a center intake cover, looking for the Cadillac one. In a few days I should have a new vortec max one that I could trade if you wanted.
Also need a "cold air" intake that will fit on a stock throttle body.
Kind of random but I need a socket that will fit my crank pulley bolt. I have no clue what happened to mine but it is of course the only one I can't find.
Other than that a serpentine belt and a sanden 508 should be all I need to get this party started.
thanks
Picked up the side pieces locally for $25 but I still need a center intake cover, looking for the Cadillac one. In a few days I should have a new vortec max one that I could trade if you wanted.
Also need a "cold air" intake that will fit on a stock throttle body.
Kind of random but I need a socket that will fit my crank pulley bolt. I have no clue what happened to mine but it is of course the only one I can't find.
Other than that a serpentine belt and a sanden 508 should be all I need to get this party started.
thanks
Last edited by chuckd71; 10-08-2010 at 12:46 PM. Reason: Needs changed
Trending Topics
#13
Still need some flat orange corvette/ lt1 O2 extensions.
2.5 inch electric cutouts.
Sanden 508 serpentine compressor.
CTS-v dipstick, flexible or otherwise.
Let me know what you have, probably best to pm since all the emails I get about replies to threads seem to go to spam.
thanks
2.5 inch electric cutouts.
Sanden 508 serpentine compressor.
CTS-v dipstick, flexible or otherwise.
Let me know what you have, probably best to pm since all the emails I get about replies to threads seem to go to spam.
thanks