WTB: 243 Heads, Lifters, Valve Springs, ETC
01-21-2011, 09:59 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
WTB: 243 Heads, Lifters, Valve Springs, ETC So I found out that my car has a badly bent Intake valve spring, and pushrod, so time to do a top end rebuild. These are the parts I am looking for. I will be purchasing them bit by bit. Hopefully have all the parts by begining of February. I am looking for the best price possible since everything is on a budget.
CAR IS 1999 Z28, AUTOMATIC
CAR IS 1999 Z28, AUTOMATIC
PARTS I AM LOOKING FOR
243/799 HEADS (FULLY ASSEMBLED WOULD BE NICE)
PUSHRODS (WILL PROBALY BY THESE NEW)
VALVE SPRINGS (CAPABLE OF 600 LIFT OR LESS)
220 SOMETHIN CAM UNDER .590 LIFT
LIFTERS (LOW MILEAGE)
CAR IS 1999 Z28, AUTOMATIC
CAR IS 1999 Z28, AUTOMATIC
PARTS I AM LOOKING FOR
243/799 HEADS (FULLY ASSEMBLED WOULD BE NICE)
PUSHRODS (WILL PROBALY BY THESE NEW)
VALVE SPRINGS (CAPABLE OF 600 LIFT OR LESS)
220 SOMETHIN CAM UNDER .590 LIFT
LIFTERS (LOW MILEAGE)
01-26-2011, 11:14 PM
#6
TECH Regular
iTrader: (21)
Join Date: Apr 2010
Location: AZ
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Ive got a set of assembled 243 heads with stock springs. They have a fresh valve job, been cleaned up and completely ready to bolt on. the heads have been milled and have approximately 61cc-62cc combustion chambers
Trending Topics
01-27-2011, 09:46 PM
#8
I have a set of 243 heads that have been milled .010 with a fresh valve job. Can be had with either ls6 springs or Patriot duals. Also have a set of low mileage ls7 lifters.
