G Body swap items wanted.. HELP!!
#1
G Body swap items wanted.. HELP!!
Hello, i am hoping to get some parts needed for my LS1 swap and figured i would post instead of trying to buying them through fleabay. If somebody has what i'm looking for pm me a price and pics if possible. i just want these parts to be in good condition and useable and best of all cheap... lol! Here is a list of parts i need:
1. T56 vent tube
2. T56 floorboard foam "piece"
3. 99 fuel filter/regulator
4. CAGS delete plug
5. 99 LS1 fuel lines and evap lines engine to chassis.
6. 99 LS1 harness with t56 engine harness and or ECM may trade for an My auto equipped harness and ecm??
I figured if i could continue my budget ls swap then why not?? If anybody has these parts let me know..
Thanks BowtieboySS427 for the harness's..
Also boost-box any pics i wanted to use either John Bzedel pedal and adapt a stock ls Master...
1. T56 vent tube
2. T56 floorboard foam "piece"
3. 99 fuel filter/regulator
4. CAGS delete plug
5. 99 LS1 fuel lines and evap lines engine to chassis.
6. 99 LS1 harness with t56 engine harness and or ECM may trade for an My auto equipped harness and ecm??
I figured if i could continue my budget ls swap then why not?? If anybody has these parts let me know..
Thanks BowtieboySS427 for the harness's..
Also boost-box any pics i wanted to use either John Bzedel pedal and adapt a stock ls Master...
Last edited by 85GPLEf41; 03-20-2013 at 08:54 PM.
#2
I jus parted my 01trans am I have the fuel filter you need & throttle cable also 70k on them I can do $120 shipped for ya on dat I also have automatic wiring harness dat I took out my dash with sensors if u want ill do $220 everything shipped ....... Pm your number and ill send pics ............ $75 for pump $25 for cable $20 shipping I'm giving a deal..............$100 for wiring $20 for shipping cost
#4
I have the body wiring/underdash with obdII and underhood electrical harness with fuse distribution boxes.
All pulled from a 60k mile 01 SS t56 car.
Sounds like your doing a pretty complicated swap. I like it. What's your zip, Ill give the harness's to you for 50+shipping if it will help you out. Pm me if interested.
All pulled from a 60k mile 01 SS t56 car.
Sounds like your doing a pretty complicated swap. I like it. What's your zip, Ill give the harness's to you for 50+shipping if it will help you out. Pm me if interested.
#7
On The Tree
iTrader: (13)
Join Date: Sep 2009
Location: Virginia beach VA
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
If you are going the t56 route,you need to fabricate pedals. Use a third gen camaro manual assembly and graft it to the Gbody brake braket.
Also, is a GTO TICK master cylinder. It helps becuase its not angled and makes instalation much easier.
Also, is a GTO TICK master cylinder. It helps becuase its not angled and makes instalation much easier.