WTB: stroker rotating assembly LQ4
08-18-2014, 07:58 PM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Aug 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
WTB: stroker rotating assembly LQ4 I'm looking for a stroker rotating assembly for my LQ4.
Its for a vehicle that will see less than 100 miles per year, so used is OK so long as its in good condition.
I'm looking at an assembly for a 416 or even 427 if the cylinder walls turn out OK at the machine shop.
Block is getting bored out next week, so I'll be looking for parts and an assembly to put back in.
If not, no big deal, I'll source some new pistons and keep the stock lower end otherwise.
Closer to eastern NC the better.
Thanks
Rob
Its for a vehicle that will see less than 100 miles per year, so used is OK so long as its in good condition.
I'm looking at an assembly for a 416 or even 427 if the cylinder walls turn out OK at the machine shop.
Block is getting bored out next week, so I'll be looking for parts and an assembly to put back in.
If not, no big deal, I'll source some new pistons and keep the stock lower end otherwise.
Closer to eastern NC the better.
Thanks
Rob
